Select your vehicle

Armor & Protection

Armor and protection parts shield the underside and body of trail vehicles. The category includes skid plates, rock sliders and guards, roll cages and sport bars, body protection and truck cab protectors or headache racks. Brands include Go Rhino, Rubicon Express, Smittybilt and Rough Country. Compare materials, coverage and fitment on each product page, then compare the products below.

ARB four-panel under vehicle protection kit for the Ford Bronco

Rocks, stumps and ledges find the same soft spots on every 4x4: the oil pan, transmission, fuel tank, rockers and rear corners. Armor puts thick steel, aluminum or tough plastic in the way, so a bad line costs you a scrape instead of a leaking tank or a crushed quarter panel.

Body protection is the largest group, with corner guards, fender armor, cladding and trail skins for Jeeps. Skid plates cover the underside, either as single plates or full belly pan kits. Truck owners will find headache racks, cab racks and chase racks. Roll cage parts and sliders round it out. Compare the plate material and thickness first, then check whether a piece depends on a specific bumper or crossmember.

137Parts listed
38Brands
5Armor types
1/8–1/4"Plate thickness listed
3/16"Most common steel plate
55Body protection parts

Shop armor by type

Popular armor and protection

Armor material and coverage reference

Listings quote thickness in fractions, millimeters or gauge. The conversions and examples below help you compare them on equal terms.

Thickness conversions

16 gauge steel0.060" (1.5 mm)
11 gauge steel0.120" (3.0 mm)
1/8" plate0.125" (3.2 mm)
3 mm sheet0.118"
3/16" plate0.188" (4.8 mm)
1/4" plate0.250" (6.4 mm)

Fit checks from the listings

Tomken TMS-1332-PA14" control arm mount to crossmember
Artec JK belly panExhaust Y-pipe modification
Rough Country 10794 skidOnly with RC PreRunner bumpers
Poison Spyder front skidsBolt to matching PSC bumpers
Dee-Zee cab racksMount in the bed stake pockets
DV8 Gladiator chase rackHolds a 50" light bar
Fab Fours JK tailgate plateCutting or drilling required

Materials in this range

ExamplesTrade-off
Steel plate, 1/8–3/16"Rubicon Express, Poison Spyder, DV8Strongest, heaviest, can rust
Aluminum, 3/16–1/4"ADD sway bar skid, Artec belly panLighter, gouges more easily
TPO plasticBushwacker Trail Armor cornersRust-free, flexes, taped on
Magnetic skins, 0.040"Smittybilt Mag-ArmorScratch guard only, remove daily

What the skid plates cover

  • ARB Bronco kit: steering, engine sump, transmission and transfer case in 4 panels
  • ARB Land Cruiser plate: steering, oil pan, transmission and transfer case
  • Rubicon Express JL/JT: modular transmission and gas tank plates
  • DV8 JL diesel: DEF tank and muffler, with a heat barrier
  • ADD JL/JT: electric sway bar disconnect
  • Poison Spyder JK/JL crawler skids: crash bar and sway bar disconnect motor
  • Tomken XJ: NP231 transfer case

Armor adds weight fast. If you are stacking skids, sliders and steel corners, check whether your springs still hold factory ride height.

All Armor & Protection 162 parts

Showing 1–12 of 162 resultsSorted by popularity

Where vehicles need protection

Off-road damage tends to happen in the same few places: the transfer case, oil pan, fuel tank, differentials, rocker panels and rear corners. Armor covers those areas so rocks and ledges hit steel or tough plastic instead of thin factory parts. What you need depends on how rough your trails are and what your vehicle leaves exposed.

Main armor types

  • Skid plates: bolt under the vehicle to protect the engine, transfer case, gas tank, differential or control arms. A full bellypan covers several components at once.
  • Rock sliders and guards: run along the rocker panels to take side hits, and can double as a step.
  • Body armor: corner guards and fender protection, often made of steel or thermoplastic.
  • Roll cages and sport bars: add structure and mounting points, with padded covers for comfort.
  • Headache racks and chase racks: protect a truck cab or hold lights and gear.

Specs to compare

Material and thickness are the first question. Steel plate, commonly in thicknesses such as 3/16 inch, is strong and affordable but heavy, while aluminum is lighter but may dent or wear faster. Look at the finish, such as powder coat, which helps resist rust. Check whether a skid plate keeps access to drain plugs and fill points, and whether it adds clearance or reduces it. Fully welded and formed designs resist twisting better than flat plates.

Installation and safety

Many skid plates and sliders are bolt-on, but some need drilling or welding. Use hardware of the grade the manufacturer specifies and tighten it to the listed torque. Armor adds weight, which can affect springs and handling. Roll cages and sport bars are safety structures, so professional installation and proper mounting are strongly advised. Never treat a sport bar as a certified roll cage unless the manufacturer says it is. Rules about rollover protection can vary by state.

Fitment

Armor is made for specific frames, engines and axle types, so details like the engine size, door count and axle model matter. Confirm fitment for your exact year, make and model before choosing a part.

Planning an armor package

Armor is easier to plan as a system. Start with the parts most likely to be hit on your trails, such as the oil pan, transfer case and fuel tank, then add rock sliders to protect the rocker panels and body corners to protect the fenders and bed. Think about how each piece affects the others: sliders can share mounting points with the body or frame, and a skid plate that sits lower may reduce clearance for a muffler or crossmember. Keep weight in mind, since steel adds up quickly, and consider the finish, because bare steel rusts quickly while powder coat can chip after hard use and needs touching up. Inspect your armor after every rough trip, retighten bolts, and look for cracked welds or bent mounting tabs that could reduce protection the next time out.

A frequent mistake is buying armor by looks without checking mounting points. Confirm that the plate reaches solid frame or crossmember locations, and that any drain plug access, exhaust clearance and airflow to the transfer case and transmission remain adequate so components do not run hot.

Popular Armor & Protection brands

Armor & Protection FAQ

Are skid plates necessary?

They are not required for every driver, but they are a common upgrade for trail use. Factory underbody parts can be thin or exposed, so a skid plate gives a layer of protection for components that are costly or difficult to fix.

What is the difference between rock sliders and side steps?

Rock sliders are built to take impacts and support the vehicle on rocks, usually in strong steel tube or plate. Side steps are mostly for entry and exit and are generally not designed for heavy loads.

Is a sport bar the same as a roll cage?

Not usually. A sport bar gives passengers and cargo some structure and mounting points, while a full roll cage is designed to protect occupants in a rollover. Check the manufacturer's stated purpose and ratings.

Will skid plates affect my ground clearance?

A skid plate that mounts tight to the frame typically adds little thickness, but some designs hang lower. Check the product description for mounting method and dimensions, and confirm that it fits with any lift or other underbody parts you run.