Overview
The Rubicon Express Transmission Skid Plate, part number REA1021, is a transmission skid plate for the 2018-2026 Jeep Wrangler (JL) and the 2020-2026 Jeep Gladiator (JT). It is a direct fit for 2-door and 4-door Wrangler JL trims and for several Gladiator trims, including Sport, Overland, Rubicon and Mojave.
Rubicon Express says its skid plates protect the undercarriage from front to back, with plates for the engine oil pan, transmission, transfer case and fuel tank. The plates are CNC laser cut from 3/16″ steel and designed to mount up tight to the drivetrain to maximize ground clearance.
The line is a modular protection system, so plates can be added over time. This REA1021 is the transmission position plate and is a direct fit.
Key features
- Transmission skid plate
- CNC laser cut from 3/16″ steel
- Designed to mount up tight to the drivetrain to maximize ground clearance
- Part of a modular skid plate system with other plates for the oil pan, transfer case and fuel tank
- Direct fit for the Jeep Wrangler JL and Gladiator JT
Working around a transmission plate
The transmission sits close to the exhaust, the crossmember and the wiring harness, so a plate that mounts tight to the drivetrain needs careful clearance checks during installation. Set each bolt by hand first, then snug the plate evenly before final tightening.
Over time the plate can pick up dents and rub marks where it meets rocks or ridges. Check the bolts and the nearby exhaust hangers after rough trails, since a loose plate can rattle or shift against the drivetrain. A heavy plate also adds weight, so keep an eye on how the front end handles on steep grades.
- Recheck clearance to the exhaust after any repair
- Replace bent or cracked hardware rather than straightening it
- Look for fluid seepage around the transmission pan after impacts
- Keep a spare set of fasteners for trail repairs
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | REA1021 |
| Item number | R/EREA1021 |
| Product type | Transmission skid plate |
| Position | Transmission |
| Material | 3/16″ steel, CNC laser cut |
| Fit type | Direct fit |
| Vehicles | 2018-2026 Jeep Wrangler (JL); 2020-2026 Jeep Gladiator |
Vehicle fitment
The REA1021 fits the 2018-2026 Jeep Wrangler (JL) and the 2020-2026 Jeep Gladiator. On the Wrangler JL it fits 2-door models in the 80th Anniversary, Freedom, Islander, Rubicon, Sport, Sport S and Willys trims, and 4-door models in the 80th Anniversary, Freedom, High Altitude, Islander, Moab, Rubicon, Sahara, Sport, Sport S and Willys trims, plus Unlimited Rubicon 392 and 4xe Unlimited High Altitude, Rubicon and Sahara. On the Gladiator it fits the 80th Anniversary, Altitude, High Altitude, Launch Edition, Mojave, Overland, Rubicon, Sport, Sport S, Willys and Willys Sport trims.
It fits Wrangler JL models from 2018 to 2026 and Gladiator models from 2020 to 2026. Earlier Wrangler generations such as the TJ or JK are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A skid plate is heavy and awkward under the vehicle, so use rated stands and a helper to hold it while the bolts are started.
- Torque all hardware to the values in the installation instructions.
- Check that it clears the exhaust, crossmember and wiring before final tightening.
- Retighten after the first drive and again after the first off-road outing.
- A professional is worth hiring if the install calls for drilling, cutting or welding.








