Overview
The Smittybilt SRC 7-Piece Roll Cage Kit, part number 76901 (S/B76901), is a bolt-in roll cage kit that strengthens the factory roll bar on the 2007–2010 Jeep Wrangler (JK).
The reinforced cage kit turns the factory roll bar into a stronger base for a rollover. It starts with 1020 .120 wall DOM tubing and uses a Knuckle System that attaches to the factory roll bar, with a pivot and fastening point at one end and grade 10 fasteners at the other. Every cage is engineered to bolt in with no modifications to the vehicle. The 7-piece count separates this kit from the 6-piece kit for the same years, so check the pieces you need before choosing.
Key features
- 7-piece SRC roll cage kit
- 1020 .120 wall DOM tubing
- Knuckle System attaches to the factory roll bar
- Pivot and fastening point on one end and grade 10 fasteners on the other
- Engineered to bolt in with no modifications to the vehicle
- Designed to strengthen the factory roll bar
Bolt-in cage considerations
A roll cage adds strength around the occupants, and bolt-in kits build on the factory roll bar rather than replacing it. The design of the attachment points, the tubing and the fasteners all affect how the load moves through the frame. For this reason, the mounting points and fastener grade should be checked regularly, and any loose or damaged parts should be addressed right away.
Grade 10 fasteners need the right torque and clean threads before installation, and retorquing after the first few drives is a sensible habit. Inspect the welds, the tubing and the pivot points for cracks, rust or movement after off-road trips. Keep the cage coated to slow corrosion, and avoid welding on a finished cage unless the installer approves the work.
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | S/B76901 |
| Product type | Roll cage kit, 7-piece |
| Tubing | 1020 .120 wall DOM |
| Attachment | Knuckle System with pivot point and grade 10 fasteners |
| Fitment type | Direct fit |
| Installation type | Bolt in, no vehicle modifications required |
Vehicle fitment
Smittybilt lists cage kit 76901 for the Jeep Wrangler (JK) in model years 2007 through 2010, the same years as the 6-piece kit 76902.
It fits 2007–2010 Jeep Wrangler (JK) models. The 2011–2018 JK years, JL, TJ and YJ are not covered. Check fit for your year, model and trim before buying.
Installation notes
The cages are engineered to bolt in with no modifications to the vehicle. A roll cage is a safety structure, so have the finished installation checked by a qualified installer.
What’s included
The kit includes the parts needed to strengthen the factory roll bar, and it is a 7-piece set.













