Overview
The Smittybilt SRC 6-Piece Roll Cage Kit, part number 76904 (S/B76904), is a bolt-in roll cage kit that strengthens the factory roll bar on the 2011–2018 Jeep Wrangler (JK).
The reinforced cage kit includes what is needed to build the factory roll bar into a solid foundation if a rollover happens. It starts with 1020 .120 wall DOM tubing, and the Knuckle System attaches to the factory roll bar with a pivot and fastening point at one end and grade 10 fasteners at the other. The cage is engineered to bolt in and requires no modifications to the vehicle. It builds on the existing roll bar rather than replacing it, and it is a 6-piece set.
Key features
- 6-piece SRC roll cage kit
- 1020 .120 wall DOM tubing
- Knuckle System attaches to the factory roll bar
- Pivot and fastening point on one end and grade 10 fasteners on the other
- Engineered to bolt in with no modifications to the vehicle
- Designed to strengthen the factory roll bar
Fitting around seats and harnesses
A cage kit changes the space around the front and rear seats, so plan seat belt routing and seat adjustment before final tightening. Seat belt anchors should stay in place and move freely, and seats should still clear the tubing through their full travel. Test the belts and seat movement once everything is bolted in.
Roll cage fit depends on the factory roll bar being in good condition, so check the bar, its mounts and the floor pinch welds for rust or cracks before installing. Soft tops and door hardware can also shift once the cage is added, so re-check top clearance after the first install. Keep harness mounts in mind when choosing where to add accessories later.
- Check seat belt movement after installation
- Inspect the factory roll bar mounts for rust
- Re-check top clearance and door hardware fit
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | S/B76904 |
| Product type | Roll cage kit, 6-piece |
| Tubing | 1020 .120 wall DOM |
| Attachment | Knuckle System with pivot point and grade 10 fasteners |
| Fitment type | Direct fit |
| Installation type | Bolt in, no vehicle modifications required |
Vehicle fitment
Smittybilt lists cage kit 76904 for the Jeep Wrangler (JK) in model years 2011 through 2018.
It is a direct fit for 2011–2018 Jeep Wrangler (JK) models. The 2007–2010 JK years, the JL, TJ and YJ are not covered. Verify fit against your year, model and trim.
Installation notes
The cage is engineered to bolt in and requires no modifications to the vehicle. A roll cage is a safety structure, so have the finished installation checked by a qualified installer.
What’s included
The kit includes what is needed to strengthen the factory roll bar, as a 6-piece set.













