Toyota 4Runner Suspension
164 suspension listed for the 1984–2024 Toyota 4Runner
Showing 121–144 of 164 resultsSorted by popularity
-
Shock Absorbers
RS5000X Series Suspension Strut Assembly
- Front RS5000X Series strut assembly for 1996–2000 Toyota 4Runner (Base) and 1995–2004 Tacoma (Base, Limited, Pre Runner, S-Runner, SR5)
- Rancho front RS5000X Series suspension strut assembly, part number RS55762
- Gas-pressurized twin tube body with 16 mm nitro carburized rod and 35 mm full displaced bore
- Progressive engagement valving and tuned compression control valve
- Rebound bumper, protective boot and Fluon-banded piston
SKU: RANRS55762 -
Sway Bar Bushings & Brackets
Energy Suspension Sway Bar Bushing Set (Black) – 8.5102G
- Fits 1984–1988 Toyota 4Runner (DLX, SR5)
- Fits 1980–1988 Toyota Pickup (Base, Base Turbo, DLX, SR5, SR5 Turbo)
- Front sway bar bushings sized for a 23mm bar
- Black polyurethane with greaseable bushings
- Part number 8.5102G
SKU: ENE8.5102G -
Lift Kits
Tuff Country 4 Inch Lift Kit w/ Shocks – 54804KN
- Tuff Country 54804KN 4 inch lift with SX8000 shocks for 1986–1995 Toyota Pickup and 1986–1989 Toyota 4Runner
- Rear springs and X member
- A-arm drop bracket, differential bracket and sway bar bracket
- Bump stop spacer, spindle adapter and brake cable extension
- Part number 54804KN
SKU: T/C54804KN -
Lift Kits
Tuff Country Lift Kit – 54800K
- Tuff Country 54800K 4 inch lift for 1986–1989 Toyota 4Runner and Toyota Pickup
- Rear springs and X member
- A-arm drop bracket, differential bracket and sway bar bracket
- Bump stop spacer, spindle adapter and brake cable extension
- Shocks not included; part number 54800K
SKU: T/C54800K -
Shock Absorbers
Skyjacker Softride Nitro Shock Absorber – N8002
- Front Softride Nitro twin-tube shock, part N8002, Nitro Series
- Fits 1986-1989 Toyota 4Runner (DLX, SR5) and 1986-1995 Toyota Pickup
- 150 PSI nitrogen gas, bonded iron piston, chromed piston rod
- Red polyurethane bushings and red boot included
- Rated for 0 to 2 in. lift
SKU: SKYN8002 -
Shock Absorbers
Skyjacker Softride Hydro Shock Absorber – H7004
- Skyjacker Softride Hydro front shock absorber, part number H7004
- Twin tube construction with 5/8 in. hardened double chrome rod
- Fits a 3 – 4 in. lift on 4Runner and Pickup models
- Includes red boot and red polyurethane bushings
SKU: SKYH7004 -
-
Shock Absorbers
Skyjacker BlackMAX Shock Absorber – B8504
- Front Black MAX shock absorber for listed 1986–1989 Toyota 4Runner and 1986–1995 Toyota Pickup trucks
- Part number B8504; extended length 18.66 in., collapsed length 11.52 in.
- Black boot included
- 4Runner listing covers DLX and SR5 trims
SKU: SKYB8504 -
Shock Absorbers
Rancho RS9000XL Series Shock Absorber – RS999180
- Rear RS9000XL Series shock absorber, part number RS999180, for Toyota 4Runner, Pickup and Tacoma
- Fits 1986-1989 4Runner, 1989-1995 Pickup and 1995-2004 Tacoma per the manufacturer list
- Rated for 0 to 1 in. of lift
- 9-position manual/remote tuning with an 18mm chrome rod
- Nitrogen gas charged, 2.75-in. (70mm) body
SKU: RANRS999180 -
-
Shock Absorbers
Pro Comp ES9000 Series Shock Absorber – 921506
- Rear ES9000 Series gas charged twin tube shock, sold as each
- Fits Dodge Ramcharger, W100, W150, W200 and W250, Plymouth Trailduster, Toyota 4Runner and Toyota Pickup models by year range
- Extended length 21.75 in, collapsed length 13.06 in
- Rated for a 0 to 1 in lift, factory upper and lower mounts
- Shock boot not included
SKU: EXP921506 -
Shock Absorbers
Pro Comp ES3000 Series Shock Absorber – 326506
- Rear shock for 1986–1989 Toyota 4Runner DLX and SR5 and 1995–2004 Toyota Tacoma
- Part 326506, ES3000 Series, rated for a 4 in. lift
- Factory upper and lower mounts, lengths vehicle specific
- Hydraulic, non-adjustable, sold as each
SKU: EXP326506 -
Shock Absorbers
Bilstein 5100 Series Shock Absorber – 24-185752
- Bilstein 5100 Series shock, part 24-185752, eye mounts at both ends
- Fits 1986–1989 Toyota 4Runner and 1986–1995 Toyota Pickup in the trims covered
- Collapsed 16 in, extended 25.63 in, travel 9.63 in
- Zinc plated finish, 14mm shaft, boot included
SKU: BIL24-185752 -
Shock Absorbers
Bilstein 4600 Series Shock Absorber – 24-011396
- Bilstein 4600 Series front gas charged monotube shock absorber, part number 24-011396
- Direct fit for the listed 1986–1989 Toyota 4Runner (DLX, SR5) models
- Also fits 1986–1995 Toyota Pickup (Base, Base Turbo, DLX, SR5, SR5 Turbo) models
- Lift/drop 0 in, 2 in body diameter, yellow finish
- Boots included, no reservoir
SKU: BIL24-011396 -
Leveling Compressor Kits
AirLift Load Controller II On-Board Air Compressor Control System – 25812
- AirLift Load Controller II on-board compressor control system, part number 25812
- Levels vehicle from side to side
- Dual gauge and 5 psi low pressure sensor
- Comes with new wiring harness
- Fits many 2007–2018 trucks, SUVs and cars
SKU: AIR25812 -
Shock Absorbers
Rancho RS9000XL Series Shock Absorber – RS999777
- Fits 2003–2004 and 2016 Toyota 4Runner (Limited, SR5, Sport, TRD Pro, Trail)
- Fits 2005–2018 Toyota Tacoma (Base, Limited, SR, SR5, TRD Off-Road, TRD Pro, TRD Sport)
- Front RS9000XL shock absorber, part RS999777, gas charged
- 2.75 in. (70mm) body with 18mm chrome rod
- 9-position manual or remote tuning
SKU: RANRS999777 -
Shock Absorbers
Pro Comp ES6000 Series Strut – 618053
- Pro Comp ES6000 gas-charged front strut, part number 618053, requires an OEM coil spring
- Fits 1996 to 1998 Toyota 4Runner and 1998 to 2004 Toyota Tacoma
- Lift rating 0 to 2 in.; factory upper and lower mounts
- Double-welded mounts and an expanded twin-tube design
SKU: EXP618053 -
Suspension Leveling Kits
Trail Gear 3 Inch Classic Front Lift Kit – 110039-1-KIT
- 3-inch front lift kit with 47-inch leaf springs for 1979–1985 Toyota Pickup and 1984–1985 Toyota 4Runner
- Includes Bilstein shocks, shock hoops, U-bolt flip kit, extended brake lines and high steer crossover steering
- Rated lift range 3 to 4.99 inches, part number 110039-1-KIT
SKU: TGI110039-1-KIT -
Shock Absorbers
Tuff Country SX6000 Shock Absorber – 62232
- Tuff Country SX6000 front shock absorber, part number 62232
- Lift note: w/4 in. Lift
- Twin-tube design with multi-stage valving and polyurethane bushings
- Cellular gas charge noted to limit fading
- Covers 1978 to 2014 Chevrolet, GMC, Ford, Dodge, Ram, Jeep and Toyota vehicles
SKU: T/C62232 -
Shock Absorbers
Tuff Country SX8000 Shock Absorber – 61232
- Tuff Country SX8000 front shock absorber, part number 61232
- Twin-tube, nitrogen gas charged with polyurethane bushings
- Heavy-duty 5/8 inch piston rod
- Fits 1978 to 2015 Chevrolet, GMC, Ford, Dodge, Ram, Jeep and Toyota trucks
- Lift note: w/3.5 in. Rear Stock Blks
SKU: T/C61232 -
Leaf Spring
Skyjacker Softride Leaf Spring Front – T307S
- Front Softride leaf spring, part number T307S, for the 1980–1985 Toyota Pickup and 1984–1985 Toyota 4Runner
- Lift height range of 7 and up
- Bushings not included; recommended bushing part number SKYSE30T
- Progressive multileaf pack in American steel
SKU: SKYT307S -
Leaf Spring
Skyjacker Softride Leaf Spring Front – T303S
- Front Softride leaf spring, part number T303S, for the 1980–1985 Toyota Pickup and 1984–1985 Toyota 4Runner
- Progressive multileaf pack in American steel
- Bushings not included; recommended bushing part number SKYSE30T
- Single spring; order 2 for a pair
SKU: SKYT303S -
Shock Absorbers
Skyjacker Softride Nitro Shock Absorber – N8056
- Front gas-charged Nitro shock, part number N8056
- Stated collapsed length 14.54 in. and extended length 24.75 in.
- Rated for 6.5 – 8 in. lift on Ford Bronco, F-Series and Toyota models
- 150 PSI nitrogen gas charge, multi-stage velocity sensitive valving
SKU: SKYN8056
