Overview
The Fabtech FTS6017 is a rear Stealth monotube shock absorber for the 2010–2017 Toyota 4Runner and the 2007–2013 Toyota FJ Cruiser. It is gas charged and rated for a 6 in. lift.
The shock uses a 46mm diameter high flow piston with valving set to each vehicle. The free floating piston is there to keep nitrogen gas from mixing with the oil, which Fabtech says helps limit shock fade off-road. Oversized tires are the application Fabtech targets.
Key features
- Rear position for 4Runner and FJ Cruiser applications
- 46mm diameter high flow piston
- Vehicle specific valving
- Gas charged construction with a free floating piston
Rear shock on the trail
A rear shock controls wheel movement on the axle, so it works hardest on rough trails, sharp hits and loaded beds. Under those conditions the oil heats and damping can change, which is why the design uses a free floating piston to keep gas and oil apart. Mount bushings often wear first on high-mileage trucks.
Rear shock eyelets and bushings deserve a close look during replacement. Worn bushings allow the shock to shift off its axis, which causes clunks and early failure. Replace any cracked rubber and check the bolts for proper tightness before the first drive.
If you run a rear lift or heavier tires, check that the shock length matches the new ride height. Compare the new unit with your current shock, and consider replacing both rear shocks at the same time so the rear end feels even.
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FABFTS6017 |
| UPC | 674866089600 |
| Shock type | Stealth monotube |
| Position | Rear |
| Piston | 46mm diameter, high flow |
| Valving | Vehicle specific |
| Charge type | Gas charged |
| Fitment | Direct fit |
| Lift height | 6 in. lift |
Vehicle fitment
It fits the 2010–2017 Toyota 4Runner in Limited, SR5, TRD Off-Road and Trail trims, and the 2007–2013 Toyota FJ Cruiser in Base, TRD Special Edition and Trail Teams Special Edition trims.
Not on this list: 4Runner years before 2010 or after 2017, FJ Cruiser years after 2013, and other Toyota models. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The item is the Fabtech Stealth monotube shock absorber, part number FABFTS6017. Check the package contents against your installation before starting.









