Overview
The Pro Comp 3.5-inch Lift Kit with PRO-VST 2.5-inch Coilovers and Shocks with Rear Coil Spacers and Upper Control Arms, part number K5099BXU (EXPK5099BXU), is a lift for the Toyota 4Runner and FJ Cruiser. It fits 2003 to 2009 4Runner models and 2007 to 2009 FJ Cruiser models.
This kit is the narrower-year counterpart of the K5098BXU, which covers a longer 4Runner range. Both use PRO-VST front and rear shocks and 2.5-inch PRO-VST coilovers. The kit uses rear coil spacers and upper control arms, and the specifications match the spacers.
The PRO-VST system is tuned for 33-inch tires on 17-inch wheels. The lift is 3 to 3.5 inches, with a lift height range of 0 to 3.5 inches. It improves travel and rebound, and the upper control arms are American-made Pro Series parts with high-angle ball joints.
Key features
- 3 to 3.5-inch lift
- PRO-VST front and rear shocks, included
- 2.5-inch PRO-VST coilovers
- Rear coil spacers.
- Upper control arms.
- Tuned for 33-inch tires on 17-inch wheels
Before you buy
Lift kits built for a single year range often leave owners wondering how the kit will sit beside stock suspension parts that were never replaced. Springs, shocks and control arms share loads, so a change in one usually shows up in the others. Shocks carry much of the damping work, which makes their condition worth checking early.
When comparing kits, look at how the rear is handled, whether brake hoses and sway bar links are long enough for the new height, and whether the tire plan matches the tuning. A setup tuned for one tire diameter can feel different on another, and steering feel is often the first sign of a mismatch.
- Measure brake hose length after the lift
- Inspect sway bar end links for wear
- Note any change in ride on the first highway drive
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | EXPK5099BXU (title K5099BXU) |
| Suspension type | Lift kit |
| Lift | 3 to 3.5 inches |
| Lift height range | 0 to 3.5 inches |
| Shocks | PRO-VST, front and rear, included |
| Coilovers | 2.5-inch PRO-VST |
| Rear lift component | Coil spring spacers |
| Tire size | 33 inch |
| Fitment | Direct fit |
Vehicle fitment
It fits the 2003-2009 Toyota 4Runner and the 2007-2009 Toyota FJ Cruiser. The kit does not cover 2010 and newer 4Runner models or 2010 and newer FJ Cruisers.
The list does not include 2010 and newer 4Runner models or 2010 and newer FJ Cruisers, so those years are not confirmed. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit is a direct fit. Changes to ride height and suspension geometry mean the alignment should be checked and the driveline angles measured after the work is done.
What’s included
The kit includes PRO-VST front and rear shocks, 2.5-inch coilovers, rear coil spacers and upper control arms. Confirm the hardware contents against your installation before starting.














