Overview
The ICON V.S. 2.5 Series Remote Reservoir Shock Set, part number ICO57800P, is a rear monotube reservoir set for the 1996–2002 Toyota 4Runner in its Base, Limited and SR5 versions. It is hydraulic and gas charged.
Built for each application in length and damping tune, these shocks can be rebuilt and revalved. Inside the body, a billet aluminum manifold sits a few inches below the top cap to form the bump zone, which adds about 20% more damping force for smoother control near full compression.
ICON also points to its Compression Damping Control Valve (CDCV) and OMEGA Series bypass shocks for owners who want a more user-defined tune.
This rear set uses a billet aluminum manifold to form an internal bump zone a few inches under the top cap. The zone adds about 20% more damping force, and each shock is configured in length and damping tune for its application.
Owners of the 1996 to 2002 4Runner should check the trim on the truck against the three listed versions, since the fitment covers the Base, Limited and SR5 only.
The fitment is for the 4Runner only, so this rear set is not a fit for the Tacoma or the Tundra.
Key features
- Monotube reservoir design for the rear of the 4Runner.
- Bump zone that adds about 20% more damping force.
- Billet aluminum manifold forms the internal bump zone.
- Configured for each application in length and damping tune.
- Rebuildable and revalveable.
Rear 4Runner shock upkeep
Shocks on a 4Runner from this era are often well into their service life, so rear damping may have faded even if the truck still looks sound. A rear set with a remote reservoir can help keep damping steady on rough trails, and a rebuildable design lets owners refresh the shock rather than discard it. Consider the age and mileage of the rest of the suspension before fitting new rear units.
A thorough inspection looks at the reservoir hose, the shock body for seepage, the mounting bushings and the bump stops. Worn bushings can make a new shock feel loose or noisy, so they are worth replacing at the same time. Tire wear that is heavier on one edge can also indicate that the rear dampers are no longer controlling the axle.
- Inspect the reservoir hose for chafing
- Replace worn bushings during the same job
- Compare tire wear across the rear axle
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part number | ICO57800P |
| Shock series | 2.5 Remote Reservoir |
| Position | Rear |
| Shock type | Monotube reservoir |
| Bump zone damping increase | About 20% |
| Damping | Hydraulic |
| Charge | Gas charged |
Vehicle fitment
It fits the 1996–2002 Toyota 4Runner in Base, Limited and SR5 versions. Confirm fit for your model year and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Rear shock set. Verify the parts list and mounting hardware against your installation before starting.