Overview
The Icon Suspension 58747 is a front extended travel remote reservoir coilover shock kit for the 2010 to 2017 Toyota 4Runner and 2010 to 2014 FJ Cruiser, with 0 to 3 inch adjustable ride height. It uses a race shock piston built to handle extended off road use with an external reservoir.
The kit includes sway bar relocation brackets, reservoir mounting brackets and the hardware needed for installation. The mounting bracket orients the reservoir for tire clearance. The shock is completely re-buildable, has a hose length optimized for fluid transfer, and uses a nitro-steel shaft rather than chrome.
Key features
- Race shock piston with flutter stack compression valving
- External reservoir for cooling, with reservoir mounting brackets included
- Mounting bracket orients the reservoir for optimum tire clearance
- Billet aluminum upper mount and 5/8 inch PTFE-lined spherical bearing
- Nitro-steel shaft that Icon says will not chip or rust like chrome shafts
- Completely re-buildable design with an optimized hose length
- Adjustable ride height from 0 to 3 inch
Remote reservoir care
A remote reservoir gives the shock room to hold fluid separate from the body, which helps the damping stay consistent when the truck is worked hard off road. The external reservoir also needs clearance from tires and frame, which is why the mounting bracket matters. Choosing a setup means checking that the reservoir sits clear of the wheel at full turn and full compression.
Bushings, the billet upper mount and the spherical bearing are the parts most likely to need attention over time. Check the bearing for play and the hose for chafing after rough trips. Because the shock can be rebuilt, worn seals and shafts can be serviced instead of replacing the whole unit.
- Confirm reservoir clearance at full turn
- Inspect the spherical bearing for play
- Look for seepage at the shaft seal
Specifications
| Brand | Icon Suspension |
|---|---|
| Part number | 58747 |
| UPC | 70000588355 |
| Position | Front |
| Ride height adjustment | 0 to 3 inch |
| Reservoir charge | 250 PSI nitrogen-charged internal reservoir |
| Spring | Chrome-silicon spring |
| Body finish | Cad-plated threaded body, extreme weather plating option available |
| Upper mount | Billet aluminum |
| Bearing | 5/8 inch PTFE-lined spherical bearing |
| Shaft | Nitro-steel |
| Made in | USA, 100% |
| Recommended tire size | 285/75R16 |
| Recommended wheel | 16X8 with 5 inch back spacing |
Vehicle fitment
It fits the 2010 to 2017 Toyota 4Runner in the Limited, SR5, TRD Off-Road, TRD Pro and Trail trims, and the 2010 to 2014 Toyota FJ Cruiser in the Base trim.
The list does not cover 4Runner years before 2010 or after 2017. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Icon says these coilovers are meant to be installed with an aftermarket uniball upper control arm kit, which keeps wheel travel correct and helps prevent premature ball joint wear. The sway bar relocation brackets clear the larger shock. Because the ride height changes, have the alignment and driveline angles checked after installation.
What’s included
Front coilover shock kit with sway bar relocation brackets, reservoir mounting brackets and all required hardware.
Not included: The aftermarket uniball upper control arm kit that Icon recommends.