Overview
The TeraFlex bump stop kit, part number 1910234, is a direct-fit nylon bump stop for Jeep Wrangler TJ and LJ models from 1997 to 2006. Bump stops limit how far the suspension can compress at full travel.
It fits 2004–2006 Wrangler LJ Unlimited and Unlimited Rubicon models, and 1997–2006 Wrangler TJ 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X trims.
Key features
- Nylon bump stop type
- Direct fit design.
- Part number 1910234 with UPC 843885024286
- Covers the TJ and LJ Wrangler trims in the fitment section below
How bump stops work
A bump stop is the last point of contact in suspension travel. When the axle moves up toward the frame at full compression, the stop takes the load so the springs, shocks and mounts are not forced past their limits. On a Wrangler TJ or LJ that work happens at the front and rear, and the stop is often the first part a driver hears when the suspension bottoms out hard on a trail or a rough road.
Nylon stops are firm and resist the tearing that softer rubber can show after repeated hard compressions. Check each stop for cracks, flattened faces or a loose mount during routine service, especially after off-road use. Compare the stop’s height with the old one before fitting, and keep the mounting bolts tightened to the factory value in a service manual.
- Inspect for cracks and flat spots after trail use
- Replace stops that have shifted out of their mounts
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 1910234 |
| UPC | 843885024286 |
| Type | Nylon bump |
| Fitment type | Direct fit |
Vehicle fitment
Fitment covers the 2004–2006 Jeep Wrangler (LJ) Unlimited and Unlimited Rubicon, and the 1997–2006 Jeep Wrangler (TJ) 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X.
Other generations, such as the 1987–1995 YJ and the 2007–2018 JK, are not covered. Line up your Wrangler’s model year and trim with the entries above before you choose this kit.
What’s included
The kit is sold under part number 1910234. Check the package contents against your installation steps, including the piece count and hardware, before you start.









