Overview
The TeraFlex SpeedBump Bumpstop Kit, part number 1958300, is a composite progressive bump stop system for the 2007–2015 Jeep Wrangler (JK). TeraFlex designed the SpeedBump for high-performance JK Wrangler applications, to reduce harsh bump stop bottoming when the suspension compresses.
The kit contains four pieces, two front and two rear, plus front adjustment spacers and front lower bump stop strike pads. It is maintenance free, needs no custom adjustment or tuning, and bolts on without welding.
Key features
- Composite progressive bump stop system
- Nitrogen-charged closed-cell microcellular polyurethane that TeraFlex says does not fade under extended heavy use
- The nitrogen-charged closed-cell microcellular polyurethane is designed to resist fading under extended heavy use.
- Self-lubricating Delrin acetal resin polymer shaft
- External shaft seal that wipes and cleans the shaft
- Maintenance free, with no custom adjustment or tuning
- Bolt-on installation with no welding
- Front bump stop bell must be removed on front applications
Before you buy
A bump stop works at the end of suspension travel, cushioning the axle when the springs and shocks run out of room. On a JK, that moment often comes on rough trail crossings and hard landings, so the stop’s material and shape change how the vehicle feels when it bottoms. A progressive design firms up as it compresses, which is why many drivers prefer this style over a basic rubber stop.
Before buying, consider how much travel your current setup uses and whether you plan to add larger tires or a lift. Ride height changes can move where the stops engage, so check clearance with the new setup. Stops are often replaced alongside shocks and worn bushings, because worn shocks let the axle reach the stop sooner. Inspect the stops for cracks, flattened areas and loose mounts during routine service, especially after heavy off-road use.
- Check shock condition before adding new stops
- Look for cracks or flattened surfaces at each service
- Recheck mounting hardware after the first few trail runs
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 1958300 |
| UPC | 843885025115 |
| Product type | Bump stop kit |
| Product name | SpeedBump |
| Kit contents | 4 bump stops: 2 front and 2 rear |
| Also included | Front adjustment spacers, front lower bump stop strike pads |
| Bump stop material | Closed-cell nitrogen-charged microcellular polyurethane |
| Shaft material | Delrin acetal resin polymer, self-lubricating |
| Fit type | Direct fit |
Vehicle fitment
It fits the 2007–2015 Jeep Wrangler (JK) in 70th Anniversary, Rubicon, Sahara, Sport and X trims, and in the Unlimited versions of those trims. It is designed for JK Wrangler applications.
It is designed for the 2007–2015 Jeep Wrangler JK. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Bump stops sit in the path of suspension travel and affect control, so professional installation is a sound choice. Park on level ground, set the vehicle on jack stands, and never get under it while it hangs from a jack alone. Torque fasteners to the correct values and recheck them after the first drive. Check alignment after any suspension change, and keep brake lines, cables and wiring clear of the stops at full compression and droop.
The factory bump stop bell must be removed on front applications only, and the installation is bolt-on with no welding.
What’s included
Two front SpeedBump bump stops and two rear SpeedBump bump stops, front adjustment spacers and front lower bump stop strike pads.









