Overview
The TeraFlex front lower SpeedBump bump stop pad, part number 1467250, is designed to work with the SpeedBump bump stop system on the Jeep Wrangler JK. It extends the effective bump stop length by 2.5 in, and the pads come as a pair.
Correct bump stop length helps protect suspension components, shock absorbers and fenders from damage. These pads are for 2007-2015 Wrangler JK models.
Key features
- Extends effective bump stop length by 2.5 in
- Designed to work with the SpeedBump bump stop system
- Simple bolt-on installation
- Front lower position, 2.5 in tall
- Comes as a pair
Bump stop length and clearance
Bump stop length sets the point where the suspension stops compressing, so it influences shocks, fenders, brake lines and the axle at the bottom of travel. A stop that engages too early can make the ride harsh, while one that engages too late can let the tires or shock bodies strike parts of the body. Matching stop length to suspension height is the main goal when adding extension parts.
Extension pads are usually installed as part of a set, since the stop position depends on the other components. Check the whole arrangement with the truck at full compression and at full droop, and look for rubbing on the tire, shock body and fender liner. Inspect pad surfaces during service for cracks, separation and wear, and replace them if they are damaged. Recheck clearance after any change to tire size or suspension height.
- Check clearance at full compression and full droop
- Inspect the pad bond and surface for wear
- Recheck after changing tire size
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 1467250 |
| UPC | 843885022008 |
| Position | Front lower |
| Height | 2.5 in |
| Length extension | 2.5 in |
| Packaging | Pair |
| Fitment type | Direct fit |
Vehicle fitment
The pads fit 2007-2015 Wrangler JK models, with the Rubicon, Sahara and Sport trims among them, and the Unlimited versions of those trims.
Later JL Wranglers and earlier generations are outside the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The installation is bolt-on. Because the pads change how far the suspension can compress, check that they clear the fenders and shock absorbers at full travel after installation.
What’s included
The pads come as a pair.
Not included: the SpeedBump bump stop system, which these pads are designed to work with.









