Overview
The ReadyLift 67-3809 is a rear shock extension bracket set for 1999 to 2021 GM 1500 trucks in 2WD and 4WD. It is made for installing a rear lift block when the factory shocks are too short, and it lets the owner keep the factory length shocks.
The extensions are fabricated steel with heavy duty welded construction, and each is about 2 inches eye to eye. The set includes new shock mounting hardware. They work with 1 inch, 2 inch, 3 inch and 4 inch rear blocks depending on the application.
The extensions work alongside a rear block kit, which puts a slight rake back in a truck for hauling or towing. A rear lift can call for longer shocks, and these extensions address that need.
Key features
- Heavy duty welded steel construction
- About 2 inches eye to eye
- Lets factory length shocks be reused with a rear lift
- Designed for 1, 2, 3 and 4 inch rear blocks, depending on the application
- New shock mounting hardware included
Shock length and rear lift
A rear block raises the axle, which pulls the shocks toward the end of their travel. Shock length and mounting angle both matter, and an extension keeps the factory shock in use at the new height. Confirm the shock stroke and clearance once the block is installed, since the rear suspension moves differently at the new height.
Shocks wear over time, and extensions add a point where hardware can loosen. Check the mounting bolts and hardware at regular service intervals, and look for leaks or damaged bushings in the shock. Worn shocks should be replaced as a pair so the rear suspension stays balanced.
- Recheck shock mounting bolts after installation
- Look for shock leaks or damaged bushings
- Replace worn shocks as a pair
Specifications
| Brand | ReadyLift |
|---|---|
| Part number | RDY67-3809 |
| Product type | Rear shock extension bracket set |
| Length | About 2 inches eye to eye |
| Construction | Heavy duty welded steel |
| Block sizes | 1, 2, 3 and 4 inch rear blocks |
| Fitment type | Direct fit |
| Vehicle | GM 1500, 1999 to 2021, 2WD and 4WD |
Vehicle fitment
It fits the 1999 to 2021 Chevrolet Silverado 1500 in the Base, Custom, Custom Trail Boss, High Country, Hybrid, LS, LT, LT Trail Boss, LTZ, RST, SS, SSV, WT, XFE and Z71 trims, plus the 2007 Silverado 1500 Classic and 2019 Silverado 1500 LD.
The list also covers the 1999 to 2021 GMC Sierra 1500 in the AT4, Base, C3, Denali, Elevation, HT, Hybrid, SL, SLE, SLT, WT and XFE trims, the 2007 Sierra 1500 Classic and the 2019 Sierra 1500 Limited.
The list names Silverado and Sierra 1500 trucks only. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The extensions are used with a rear lift block installed, so the factory shocks reach the new mounting height. They are for cases where the shocks are too short for the lift.
What’s included
The set includes the rear shock extensions and new shock mounting hardware. Check the package contents against your installation before starting.







