Select your vehicle

Rough Country 3″ Block and U-Bolt Kit – 6552

Rough Country

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rough Country 3 inch rear block and U-bolt kit for the 1999 to 2010 Ford F-250 Super Duty
  • Fabricated steel blocks tapered to reduce driveline angle
  • Round U-bolts with 5/8-inch thread and 16.5-inch inside length
  • Part number 6552

Description

Overview

The Rough Country 6552 is a 3 inch rear block and U-bolt kit for the 1999 to 2010 Ford F-250 Super Duty. It is a direct fit, and the blocks have a black powder coat finish. It covers the Cabela’s, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL and XLT trims.

A rear block kit is used to correct a rear that has begun to sag or to add lift height. The kit has two fabricated steel blocks, tapered to reduce driveline angles. Steel is stronger than standard cast blocks, and each block has a single 9/16-inch pin for the factory axle pad.

The round U-bolts have a 5/8-inch thread, a 3.625-inch inside width and a 16.5-inch inside length. The U-bolts are e-coated and corrosion resistant, and Rough Country says they offer four inches of thread for a secure install. The kit is backed by Rough Country’s Satisfaction Guarantee.

Key features

  • 3 inch rear lift for F-250 Super Duty
  • Fabricated steel blocks, tapered to reduce driveline angle
  • Single 9/16-inch pin for the factory axle pad
  • Round U-bolts with 5/8-inch thread
  • 16.5-inch inside length on the U-bolts
  • E-coated, corrosion resistant hardware

Things to check

Before fitting a rear block kit, look at the condition of the leaf springs and the axle pad. Old springs that have taken a set can limit how much the rear will rise, and a worn pad may not hold the pin securely. Replacing a tired spring at the same time is a common choice for a truck that has been sagging.

Measure the clearance around the rear brake lines, the driveshaft and the fuel system after the axle is repositioned. Shocks and bump stops may also need to be reviewed, since the axle sits in a different place once the blocks are in. Check the parking brake cable for slack and free movement.

After installation, re-check the U-bolt nuts and the blocks at the first service, then keep an eye on the pin and axle pad for movement or wear.

  • Inspect leaf springs before installation
  • Check brake lines and driveshaft clearance
  • Review bump stops and shock lengths

Specifications

Brand Rough Country
Part number 6552
Lift height 3 inches
Block material Fabricated steel
Block width 2.5 inches
Pin Single 9/16-inch
U-bolt style Round
U-bolt thread 5/8-inch
U-bolt inside width 3.625 inches
U-bolt inside length 16.5 inches
Fitment type Direct fit
Vehicle Ford F-250 Super Duty, 1999 to 2010

Vehicle fitment

It fits the 1999 to 2010 Ford F-250 Super Duty in the Cabela’s, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL and XLT trims. The F-350 and Excursion are not covered by this kit, and other Super Duty years fall outside its fit.

The F-350 and Excursion are not on this list, and other Super Duty years are not covered. Confirm your vehicle’s year, model and trim before ordering.

What’s included

The kit includes two fabricated steel blocks and a set of e-coated corrosion resistant steel U-bolts with four inches of thread. Check the package contents against your installation before starting, including nuts and washers.

Fitment

VehicleYearsTrims
Ford F-250 Super Duty1999–2010Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the 6552 fit a 2011 F-250?

No. It fits the 1999 to 2010 Ford F-250 Super Duty only. Later years are not covered, so confirm your model year and trim before choosing this kit.

Is this kit the same as the 6557 2 inch kit?

No. The 6552 is a 3 inch kit with 16.5-inch U-bolts for the 1999 to 2010 F-250, while the 6557 is listed at 2 inches for the 2005 to 2010 F-250 with different U-bolts. Check the lift and year before choosing one.

What thread size do the U-bolts have?

The U-bolts have a 5/8-inch thread and a 16.5-inch inside length, and the kit includes four inches of thread that Rough Country says allows a secure install.

Can a block kit fix a sagging rear by itself?

A block kit corrects the rear height, but it does not replace worn springs. If the springs have taken a set, they may need replacing to get the full benefit of the kit.

Should the driveshaft be checked after installing blocks?

Yes. Changing the rear axle position changes driveline angles, so the driveshaft should be checked for vibration and binding after installation. Address any problem before extended driving.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon