Overview
The ReadyLift 66-2294 is a 4 inch rear block kit for 1999 to 2010 Ford F-250 and F-350 Super Duty trucks in 2WD and 4WD, intended for trucks with a 2-piece driveshaft. It fits the Cabela’s, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL and XLT trims.
The kit contains a pair of 4 inch rear blocks with integrated OEM style bump stops, extended E-coated U-bolts, a carrier bearing spacer and the necessary hardware. The Super Duty blocks are OEM based with the bump stops built in. The kit puts the rake back in the truck for hauling or towing.
The kit works with ReadyLIFT suspension leveling kits and carries a Limited Lifetime Warranty. The blocks are not designed to work with air spring or load leveling kits that attach to the bump stop tangs.
Key features
- 4 inch rear lift for Super Duty trucks
- Integrated OEM style bump stops
- Extended E-coated U-bolts
- Carrier bearing spacer for the 2-piece driveshaft
- Necessary hardware included
Caring for the rear end
Blocks on a Super Duty with a 2-piece driveshaft lift the rear and move the driveline, so the setup needs a regular check. The carrier bearing spacer and the bump stop landings help position the components, but they do not replace periodic inspection. Look at the carrier bearing, the driveshaft U-joints and the bump stop areas for wear. A worn component can make the new height feel rough or noisy.
Once installed, check the U-bolt nuts and block bolts after the first few drives, then again on a regular service schedule. Inspect the leaf springs and shackles for sag or cracks, especially on a truck that tows often. Keep the brake lines and the rear shocks in good condition, because the new height can affect their length and movement. Avoid adding air bag systems to the bump stop tangs, since that is a common source of failure.
Specifications
| Brand | ReadyLift |
|---|---|
| Part number | RDY66-2294 |
| Product type | Rear block kit, OEM style |
| Lift height | 4 inches |
| Driveshaft | 2-piece |
| Drive type | 2WD and 4WD |
| Fitment type | Direct fit |
| Vehicle | Ford F-250 and F-350 Super Duty, 1999 to 2010 |
Vehicle fitment
It is a direct fit for the 1999 to 2010 Ford F-250 Super Duty and F-350 Super Duty in the Cabela’s, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL and XLT trims.
Trucks with a 1-piece driveshaft and other Super Duty years are not covered by this entry. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The blocks are not designed to work with aftermarket or factory add-on air spring or load leveling kits that attach to the bump stop tangs. ReadyLIFT says using that type of system voids the block warranties.
What’s included
The kit includes a pair of 4 inch rear blocks with integrated OEM style bump stops, extended E-coated U-bolts, a carrier bearing spacer and the necessary hardware.









