Overview
The Rough Country 6521 is a 2.5 inch rear block and U-bolt kit for GM 1500 trucks. It covers the 1988 to 1998 Chevrolet C1500 and K1500, the 1999 to 2021 Chevrolet Silverado 1500, the 2022 Silverado 1500 LTD, the 1988 to 1999 GMC K1500, the 1999 to 2021 GMC Sierra 1500 and the 2022 Sierra 1500 Limited. It is a direct fit with a black powder coat finish.
The kit corrects rear sag that develops over the life of a truck and adds lift height where needed. Each kit has two fabricated steel blocks tapered to reduce driveline angles. Steel blocks are stronger than standard cast blocks. Each block uses a single 9/16-inch pin that seats in the factory axle pad.
The U-bolts are e-coated, corrosion resistant steel, and offer four inches of thread for a secure install. Rough Country says its vehicle-specific kits are backed by its Satisfaction Guarantee.
Key features
- Fabricated steel blocks, stronger and longer lasting than cast blocks.
- Tapered to reduce driveline angle
- Single 9/16-inch pin for the factory axle pad
- E-coated corrosion resistant U-bolts with four inches of thread
- Powder coat black blocks
Choosing the right setup
A block kit changes the rear axle position, so the driveshaft angles change too. Tapered blocks are used to reduce those angles, but the rest of the rear suspension still needs to be checked. Longer shocks are commonly fitted at the same time, because the original shocks may not reach across the new spacing.
Leaf springs and U-bolts work together, so the U-bolts should be tightened to specification after the first few drives and re-checked periodically. Look at the axle pad and the pin seating for wear, and inspect the springs for cracks or sagging. Brake lines and the parking brake cable can also need attention when the axle is moved.
Keep the blocks clean and the finish intact so corrosion does not build up at the contact points. A rust-free axle pad and a properly seated pin help the kit keep its position over time.
- Check driveshaft angles after installation
- Re-torque U-bolt nuts after the first few drives
- Inspect shocks and brake lines when the axle is moved
Specifications
| Brand | Rough Country |
|---|---|
| Part number | 6521 |
| Lift height | 2.5 inches |
| Block material | Fabricated steel |
| Block width | 2.5 inches |
| Block style | Square |
| Pin | Single 9/16-inch |
| U-bolt thread | 9/16-inch |
| U-bolt inside width | 2.5 inches |
| U-bolt inside length | 10.5 inches |
| Fitment type | Direct fit |
| Vehicle | GM 1500 pickups, 1988 to 2022 |
Vehicle fitment
It fits the 1988 to 1998 Chevrolet C1500 in the 454 SS, Base, Cheyenne, Scottsdale, Silverado and WT trims, and the 1988 to 1998 Chevrolet K1500 in the Base, Cheyenne, Scottsdale, Silverado, Sport and WT trims.
The list also covers the 1999 to 2021 Chevrolet Silverado 1500, the 2022 Silverado 1500 LTD, the 1988 to 1999 GMC K1500 Sierra models, the 1999 to 2021 GMC Sierra 1500 and the 2022 Sierra 1500 Limited, each in the trims named on the list.
Trucks outside those years and trims are not covered. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The kit includes two fabricated steel blocks, four e-coated U-bolts and the hardware needed for the U-bolts. Check the package contents against your installation before starting, including the nut and washer count.









