Overview
The ReadyLift 66-2295 is a 5 inch rear block kit for 1999 to 2010 Ford F-250 and F-350 Super Duty trucks in 2WD and 4WD. It is for trucks with a 2-piece driveshaft and fits the Cabela’s, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL and XLT trims.
The kit contains two 5 inch rear blocks with integrated OEM style bump stops, four E-coated U-bolts and eight nuts and washers. The blocks are based on OEM designs and are not made from lightweight extrusions. The kit includes the carrier bearing spacer needed for the 2-piece driveshaft.
The kit puts the rake back in a truck for hauling or towing and works with the matching suspension leveling kit. Block kits from this line carry a Limited Lifetime Warranty.
Key features
- 5 inch rear lift with OEM style blocks
- Integrated OEM style bump stops
- Extended E-coated U-bolts and hardware
- Carrier bearing spacer for 2-piece driveshaft trucks
- Limited Lifetime Warranty.
Driveshaft and rear height
Two-piece driveshafts have a center support bearing that holds the middle section in place. When a rear block raises the axle, that support sits in a different position, so the carrier bearing spacer keeps the setup correct. Check the bearing and its mounts when the kit is installed and again during scheduled service.
A 5 inch rear block changes the height of the back of the truck, which affects how the tires sit in the wheel wells and how the rear suspension moves over bumps. Watch for rubbing on the first drives, particularly when the truck is loaded. Recheck the U-bolts and bump stop tangs early in the first few weeks of use.
- Inspect the carrier bearing and its mounts
- Check tire clearance in the wheel wells
- Recheck U-bolts and bump stops early on
Specifications
| Brand | ReadyLift |
|---|---|
| Part number | RDY66-2295 |
| Product type | Rear block kit, OEM style |
| Lift height | 5 inches |
| Driveshaft | 2-piece |
| Drive type | 2WD and 4WD |
| Fitment type | Direct fit |
| Vehicle | Ford F-250 and F-350 Super Duty, 1999 to 2010 |
Vehicle fitment
It fits the 1999 to 2010 Ford F-250 Super Duty and F-350 Super Duty in the Cabela’s, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL and XLT trims.
Trucks with a 1-piece driveshaft and other Super Duty years are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The blocks are not designed to work with aftermarket or factory add-on air spring or load leveling kits that attach to the bump stop tangs. ReadyLIFT says using that type of system voids the block warranties and can cause the bump stop tang to fail.
What’s included
The kit includes two 5 inch rear blocks with integrated OEM style bump stops, four extended E-coated U-bolts, eight nuts and washers, a carrier bearing spacer and the necessary hardware.









