Overview
The Pro Comp Suspension 22255 is a 2.5 inch rear lift block kit. It has two tapered cast iron risers, four U-bolts and the hardware needed to mount them.
Key features
- 2.5 inch rear lift
- Tapered riser blocks
- Hardware included
Choosing a lift block height
A rear lift block sits between the leaf spring pack and the axle, raising the axle to change rear ride height. Because the spring stays in place, the lift changes the angle of the driveline and the position of the axle relative to the body, so the effect is most noticeable on longer trips and steep grades. Shoppers often weigh how much clearance they need against how much change in driveline angle they can accept, and that tradeoff guides the choice of a block of this type.
Before fitting risers, inspect the leaf springs, shackles and bushings, since worn parts often show up once the axle moves. Plan to check the U-bolt clamp and nut torque after the first few drives, and recheck periodically as the blocks settle. Brake lines and the parking brake cable can be affected by the new axle position, so look them over before the vehicle goes back into service.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 22255 |
| UPC | 614901110241 |
| Lift height | 2.5 in |
| Riser material | Cast iron |
| Risers | 2 |
| U-bolts | 4 |
| Flat washers | 8 heavy duty |
| Hi-nuts | 8 |
Vehicle fitment
It is sold as a direct fit kit. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Two cast iron riser blocks, four U-bolts, eight heavy duty flat washers and eight hi-nuts.






