Overview
The Rough Country 6549 is a 2 inch rear block and U-bolt kit for the 2005 to 2023 Toyota Tacoma, the 2000 to 2006 Toyota Tundra and the 1979 to 1985 Toyota Pickup. It gives a 2 inch lift, is a direct fit, and has a black powder coat finish on the blocks.
Rough Country says rear sag and the wish for a little more lift both lead owners to a block kit. Each kit has two fabricated steel blocks, tapered to reduce driveline angles, which Rough Country says are much stronger than standard cast blocks. The blocks use a single 9/16-inch pin that fits into the factory axle pad, and the kit includes e-coated corrosion resistant steel U-bolts with four inches of thread.
The blocks are made of fabricated steel, which offers a longer service life than cast blocks. Vehicle-specific kits carry the Rough Country Satisfaction Guarantee.
Key features
- Two fabricated steel blocks, stronger and longer lasting than cast blocks.
- Tapered to reduce drive shaft angle
- Single 9/16-inch pin that fits the factory axle pad
- E-coated corrosion resistant steel U-bolts with four inches of thread
- Powder coat black finish
Rear block kits and driveline angles
A rear block raises the axle on the leaf springs, which changes the angle of the driveshaft. Tapered blocks reduce that angle compared with square ones, helping the driveline run more smoothly and cutting down on vibration at the u-joints. Any lift changes the relationship between the transmission and the axle, so check driveline angles after installation.
The single pin fits into the factory axle pad, so the pad and spring seat should be inspected for cracks or wear before the blocks go on. Replace worn U-bolts together with the blocks, and inspect the spring leaves once the truck has been driven under load. Re-torque the U-bolt nuts after the first few drives, since spring seats can settle.
- Inspect the axle pad for cracks
- Check driveshaft angles after installation
- Replace worn or rusted U-bolts with the blocks
- Re-torque U-bolt nuts after the first drives
Specifications
| Brand | Rough Country |
|---|---|
| Part number | 6549 |
| Lift height | 2 inches |
| Block material | Fabricated steel |
| Block width | 2.5 inches |
| Block style | Square, tapered |
| Pin | Single 9/16-inch |
| U-bolt thread | 9/16-inch |
| U-bolt inside width | 2.5 inches |
| U-bolt inside length | 8.5 inches |
| Finish | Powder coat black blocks, e-coated black U-bolts |
| Fitment type | Direct fit |
| Vehicle | Toyota Tacoma 2005 to 2023, Tundra 2000 to 2006, Pickup 1979 to 1985 |
Vehicle fitment
The kit fits the 1979 to 1985 Toyota Pickup in the Base, DLX, DLX Turbo and SR5 trims, the 2005 to 2023 Toyota Tacoma in the Base, Limited, Pre Runner, SR, SR5, TRD Off-Road, TRD Pro, TRD Sport, Trail and X-Runner trims, and the 2000 to 2006 Toyota Tundra in the Base, Limited and SR5 trims.
Other Toyota models and years are not on the list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The kit includes two fabricated steel blocks and a set of e-coated corrosion resistant steel U-bolts with four inches of thread. Compare the nuts and washers in the box with your install plan before you start.









