Select your vehicle

Rough Country 3″ Block and U-Bolt Kit – 6539

Rough Country

$89.95In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 18, 2026 3:40 AM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rough Country 3 inch rear block and U-bolt kit for the 2000 to 2005 Ford Excursion and 2005 to 2010 F-250 Super Duty
  • Tapered fabricated steel blocks with a single 9/16-inch pin
  • Round U-bolts with 5/8-inch thread and 15.5-inch inside length
  • Part number 6539

Description

Overview

The Rough Country 6539 is a 3 inch rear block and U-bolt kit for the 2000 to 2005 Ford Excursion and the 2005 to 2010 Ford F-250 Super Duty. It is a direct fit with a black powder coat finish on the blocks. It covers the Excursion in the Eddie Bauer, Limited, XLS and XLT trims, and the F-250 Super Duty in the Cabela’s, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL and XLT trims.

A rear block kit can correct rear sag or add lift height. Each kit has two fabricated steel blocks tapered to reduce driveline angles, and steel is stronger than standard cast blocks. Each block has a single 9/16-inch pin that fits the factory axle pad.

The round U-bolts have a 5/8-inch thread, a 3.625-inch inside width and a 15.5-inch inside length. They are e-coated for corrosion resistance, and the thread length allows a secure installation. The kit is backed by Rough Country’s Satisfaction Guarantee.

Key features

  • Two fabricated steel blocks, tapered to reduce driveline angle
  • Single 9/16-inch pin for the factory axle pad
  • Round U-bolts with 5/8-inch thread
  • 3.625-inch inside width and 15.5-inch inside length on the U-bolts
  • E-coated, corrosion resistant hardware

On the trail

Rear blocks mainly serve trucks that carry loads or tow, because a sagging rear can change the angle of the rear axle and affect ride and braking. On the trail, a block kit can add clearance under the rear, but the axle still moves through the leaf springs, so the U-bolts and pin seating take a lot of stress on rough ground.

Check the leaf springs, shackles and bushings for wear whenever the rear axle is out. Inspect the U-bolt threads for stretching or rust, and make sure the nuts are seated evenly. Front and rear suspension should be looked at together, since a change at the rear can alter how the truck rides up front.

Once the kit is installed, expect some retightening after the first drives, and re-check the U-bolts after heavy off-road use. Grease or protect the threads where your setup allows.

  • Re-check U-bolt nuts after rough trail runs
  • Inspect leaf spring bushings and shackles
  • Look over brake lines when the axle has moved

Specifications

Brand Rough Country
Part number 6539
Lift height 3 inches
Block material Fabricated steel
Block width 2.5 inches
Pin Single 9/16-inch
U-bolt style Round
U-bolt thread 5/8-inch
U-bolt inside width 3.625 inches
U-bolt inside length 15.5 inches
Fitment type Direct fit
Vehicle Ford Excursion, 2000 to 2005; Ford F-250 Super Duty, 2005 to 2010

Vehicle fitment

It fits the 2000 to 2005 Ford Excursion in the Eddie Bauer, Limited, XLS and XLT trims, and the 2005 to 2010 Ford F-250 Super Duty in the Cabela’s, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL and XLT trims.

Other Excursion years and other Super Duty years are not on the list. Confirm your vehicle’s year, model and trim before ordering.

What’s included

The kit includes two fabricated steel blocks and a set of e-coated corrosion resistant steel U-bolts. Check the package contents against your installation before starting, including nuts and washers.

Fitment

VehicleYearsTrims
Ford Excursion2000–2005Eddie Bauer, Limited, XLS, XLT
Ford F-250 Super Duty2005–2010Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does this 3 inch kit fit both the Excursion and the F-250?

Yes. It fits the 2000 to 2005 Ford Excursion and the 2005 to 2010 Ford F-250 Super Duty, each in the trims named for it. Confirm your model year and trim before ordering.

What U-bolt size does the 6539 use?

The U-bolts have a 5/8-inch thread and are round in style. They have a 3.625-inch inside width and a 15.5-inch inside length, and the blocks use a single 9/16-inch pin.

Why are the blocks tapered?

The blocks are tapered to reduce driveline angles. They are fabricated steel, which is stronger than standard cast blocks, and the taper helps keep the driveline closer to its intended angle after the lift.

Are blocks only useful for lifting the rear?

No. A block kit is also used to correct rear sag on a truck that has settled over time. Both uses change the rear axle position, so the driveline and brake lines should be checked after installation.

How do I know the U-bolts need replacing?

Look for stretched or damaged threads, rust that has weakened the bolt, or nuts that keep loosening. Any of these signs suggests the U-bolts should be inspected and replaced before the axle is loaded again.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon