Select your vehicle

Rancho RS9000XL Series Shock Absorber – RS999179

Rancho

Shop Ford Bronco Shock Absorbers on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Front RS9000XL Series shock absorber, part number RS999179, rated for 4 in. of lift
  • Fits 1981-1996 Ford Bronco and F-150, 1977-1979 Ford F-250 and 1987, 1989-1991 Isuzu Trooper per the list
  • Outer mount at the lower mounting position, per the specifications
  • 9-position manual/remote tuning with an 18mm chrome rod
  • Nitrogen gas charged, 2.75-in. (70mm) body

Description

Overview

The Rancho RS999179 is a front RS9000XL Series shock absorber for 1981 to 1996 Ford Bronco and F-150 trucks, 1977 to 1979 Ford F-250 pickups, and 1987 and 1989 to 1991 Isuzu Trooper models.

This front shock has a four-inch lift rating, with the outer mount at the lower mounting position. It uses a 2.75-inch (70mm) body, an 18mm chrome rod, a nitrogen gas charge and myRide 9-position manual or remote tuning. Polyurethane bushings, a liquid metallic finish and a protective boot come with it.

Key features

  • Rated for four inches of lift
  • Outer mounting at the lower mounting point, as specified
  • Nine damping positions by hand or remote
  • 2.75-inch (70mm) body with 18mm chrome rod
  • Nitrogen gas charge, polyurethane bushings and protective boot

Choosing a shock for higher lift

A taller truck changes the angle and length of the shock, so the mounting ends matter as much as the rating. Before buying, measure the distance between the eyes on the shock you are removing and compare it with the new unit. Also check the bump stops and the springs, since a lifted front end can strain parts that worked fine at stock height.

Mounting position is the detail that most often causes trouble on a lifted truck. A shock that sits in the wrong place can bind at full compression or stretch the bushings at full extension. Work through the full travel slowly after installation, and listen for contact noises before driving on rough ground.

  • Measure the eye-to-eye length of the old shock
  • Inspect bump stops and springs for wear
  • Re-torque mounting bolts after the first drives

Specifications

Brand Rancho
Part number RS999179
UPC 10039703091791
Shock series RS9000XL
Position Front
Body diameter 2.75 in. (70mm)
Rod diameter 18mm chrome
Tuning 9-position manual/remote
Charge Nitrogen gas charged
Lift rating 4 in. lift, outer at lower mounting
Finish Liquid metallic
Bushings Polyurethane, sometimes called red urethane.
Boot Protective boot included
Warranty Limited Lifetime Warranty

Vehicle fitment

The manufacturer list covers Ford Bronco from 1981 to 1996 in several trims, Ford F-150 from 1981 to 1996, Ford F-250 from 1977 to 1979 in Base, Custom, Northland, Ranger, Ranger Lariat, Ranger XLT and XLT trims, and Isuzu Trooper in 1987 and 1989 to 1991.

Ford trucks from 1997 onward and Isuzu Trooper models from 1988 are not on this list. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

The four inch rating depends on the outer mount sitting at the lower mounting point, so verify the mounting position on your truck before fitting. Because the lift is larger than the other front shocks in this series, check the eye sizes against your existing shock as well.

What’s included

One RS999179 front shock absorber with its protective boot.

Not included: Confirm the mounting hardware against your old shock before starting.

SKU: RANRS999179 Category:

Specification

Shipping weight 6.20 lbs
Package dimensions 24.10 × 3.30 × 3.10 in
brands

Fitment

VehicleYearsTrims
Ford Bronco1981–1996Custom, Eddie Bauer, Ranger XLT, XL, XLS, XLT, XLT Lariat, XLT Nite, XLT Sport
Ford F-1501981–1996Base, Custom, Eddie Bauer, Ranger, Ranger Lariat, Ranger XLT, Special, XL, XLS, XLT, XLT Lariat
Ford F-2501977–1979Base, Custom, Northland, Ranger, Ranger Lariat, Ranger XLT, XLT
Isuzu Trooper1987, 1989–1991DLX, LS, S, SE, XS

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the Rancho RS999179 fit a 1985 Ford Bronco?

Yes. The manufacturer list includes 1981 to 1996 Ford Bronco models in trims such as Custom, Eddie Bauer, Ranger XLT, XL, XLS, XLT, XLT Lariat and XLT Sport. Confirm your year, model and trim before ordering.

Is the RS999179 rated for four inches of lift?

Yes, the specification lists 4 in. lift with the outer mount at the lower mounting position. Check your truck's current lift and mounting before ordering, because the rating depends on that mount position.

Does it fit the Isuzu Trooper?

Yes for the 1987 and 1989 to 1991 Isuzu Trooper, in trims such as DLX, LS, S, SE and XS. The 1988 Trooper is not on the list, so check the year before ordering.

Why does mounting position matter on a lifted front shock?

The mounting position sets how far the shock can travel before it binds or overextends. If the outer mount is in the wrong spot, the shock can strain its bushings or hit the frame. Confirm the position on your truck before the final tightening.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Ford Bronco Shock Absorbers on Amazon