Select your vehicle

Rancho RS7000MT Monotube Shock – RS7264

Rancho

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Front RS7000MT Series monotube gas shock for a 4 in. lift
  • Fits 2000–2005 Ford Excursion and 1999–2004 Ford F-250 and F-350 Super Duty
  • Ten-stage velocity-sensitive valving with 14mm chrome rod
  • Protective boot included

Description

Overview

The Rancho RS7264 is a front RS7000MT Series monotube shock for a 4 in. lift. It fits the 2000–2005 Ford Excursion and the 1999–2004 Ford F-250 and F-350 Super Duty. Its gas-charged monotube body uses ten-stage velocity-sensitive valving.

The damping is tuned for off-road obstacles. The shock includes a 14mm chrome rod, black natural rubber bushings and a protective boot.

Key features

  • Front-position shock for the listed Excursion and Super Duty entries.
  • Gas-charged monotube design aimed at heat dissipation.
  • Ten-stage velocity-sensitive valving.
  • 14mm chrome rod.
  • Black natural rubber bushings.
  • Protective boot included.

Front shock basics

A front shock works with the steering knuckle, control arms and springs to keep the tires in contact with the ground. Because the front end steers and carries engine weight, the shock sees side loads that rear units do not, so the bushings and mounting hardware take a lot of stress over time.

When replacing a front shock, inspect the upper and lower bushings and the bolts that secure them. Worn rubber can make the steering feel vague or cause a clunk over bumps. Check that the new unit sits at the same angle as the old one so the travel is not restricted at full compression.

  • Inspect bushings at each tire rotation
  • Look for cracked or flattened rubber
  • Confirm the mounts match the old unit before installing

Specifications

Brand Rancho
Part number RS7264
UPC 39703002431
Shock series RS7000MT Series
Position Front
Design Monotube, gas charged
Body diameter 1.97 inch (50mm)
Rod 14mm chrome
Valving Ten-stage, velocity-sensitive
Bushings Black natural rubber
Lift height 4 in. lift
Finish Brushed-zinc clear coat
Fitment type Direct fit

Vehicle fitment

Rancho’s entries for the RS7264 cover the 2000–2005 Ford Excursion (Eddie Bauer, Limited, XLS and XLT), the 1999–2004 Ford F-250 Super Duty (Harley-Davidson Edition, King Ranch, Lariat, XL and XLT), and the 1999–2004 Ford F-350 Super Duty with the same trim set.

Super Duty model years after 2004 are outside the F-250 and F-350 entries. Confirm your vehicle’s year, model and trim before ordering.

What’s included

A protective boot is part of the package.

Not included: Mounting hardware. Check the package contents against your installation before starting.

SKU: RANRS7264 Category:

Specification

Shipping weight 5.78 lbs
Package dimensions 24.00 × 3.00 × 3.00 in
brands

Fitment

VehicleYearsTrims
Ford Excursion2000–2005Eddie Bauer, Limited, XLS, XLT
Ford F-250 Super Duty1999–2004Harley-Davidson Edition, King Ranch, Lariat, XL, XLT
Ford F-350 Super Duty1999–2004Harley-Davidson Edition, King Ranch, Lariat, XL, XLT

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the RS7264 fit a 2003 Ford F-250 Super Duty?

Yes. The fitment entries include 1999–2004 Ford F-250 Super Duty models, with King Ranch, Lariat, XL and XLT trims named. Confirm the trim against that entry before ordering.

Does the RS7264 fit the 2000–2005 Ford Excursion?

Yes. The entries include the 2000–2005 Ford Excursion, with Eddie Bauer, Limited, XLS and XLT trims named. The Excursion is listed separately from the Super Duty entries.

What lift does the RS7264 require?

It is a front shock for a 4 in. lift. It is part of Rancho's RS7000MT Series and has a 1.97 inch (50mm) body with a 14mm chrome rod.

How often should front shock bushings be checked?

Check them at tire rotations or whenever the front end feels loose on the highway. Cracked, torn or flattened rubber means the bushings should be replaced to keep the shock tracking correctly.

Do front shocks need replacing in pairs?

Replacing both sides together keeps the steering balanced and the damping even. A single new shock beside a worn one can make the truck pull or ride unevenly.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon