Overview
The Raceline Wheels Twist 20×12 is a black and machined aluminum wheel, part number RLW932M-21266-44. It is 20 inches in diameter and 12 inches wide and carries two bolt pattern entries, 6 on 5.5 and 6 on 135.
The Twist style has an offset of -44 and backspacing of 4.75. It is marked universal fit, so no vehicle is named; the bolt pattern and clearance measurements decide whether it fits a given hub.
Key features
- 20-inch diameter with 12-inch width
- Two bolt pattern entries: 6 on 5.5 and 6 on 135
- Offset -44 with backspacing 4.75
- Black and machined finish
- Twist style from Raceline
- Aluminum construction
Matching a six-lug hub
Six-lug hubs come in two common layouts, and the 6 on 5.5 and 6 on 135 patterns look similar enough to cause mistakes. Measure across the lug holes from the center of one hole to the opposite side, and compare the result with the pattern on the wheel. A wheel that is even slightly off will not seat square against the hub.
A 20-inch wheel with a 12-inch width carries more mass than a standard wheel, so the hub and bearings take more load. Check wheel bearing condition and ball joints during regular service, and look for play or noise that could mean the load is too high.
Tire choice matters just as much. Confirm the tire is approved for a 12-inch rim before buying, and check that its load rating suits the vehicle. Keep tire pressure correct, since a wide wheel with a negative offset reacts quickly to uneven loading.
- Count lugs and measure across the holes
- Compare the pattern with the wheel marking
- Check tire approval for a 12-inch rim
- Inspect bearings and ball joints regularly
Specifications
| Brand | Raceline Wheels |
|---|---|
| Part number | RLW932M-21266-44 |
| Style | Twist |
| Wheel diameter | 20 inches |
| Wheel width | 12 inches |
| Bolt pattern | 6 on 5.5 and 6 on 135 |
| Offset | -44 |
| Backspacing | 4.75 |
| Finish | Black/Machined |
| Construction | Aluminum |
| Fitment | Universal fit |
Vehicle fitment
No specific vehicle is named. Pick whichever of the 6 on 5.5 or 6 on 135 patterns matches your hub, then check the -44 offset and 4.75 backspacing for fender, brake and suspension clearance.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A -44 offset with a 12-inch width moves the wheel outward and can rub on fenders or suspension parts at full lock. Test clearance through full steering and suspension travel before driving on the road.
What’s included
This is a single wheel, with no hardware in the package. Not included: Lug nuts and center caps are not part of the package.









