Overview
The Raceline Wheels 950B Gauge 20×10 in Satin Black, part number RLW950B-21060-19, is a 20-inch aluminum spoke wheel that is 10 Inches wide. It has a 6 on 5.5 bolt pattern, an offset of -19, a center bore of 106 and a backspacing of 4.75.
Raceline Wheels presents the 950 Gauge as a consumer line built on design work from its off-road racing wheels. A 20×10 size with a -19 offset is a fit where clearance checks matter most, so the table below gives every measurement the manufacturer published.
Key features
- Satin Black finish on aluminum spoke construction
- 20 Inches diameter with 10 Inches width
- 6 on 5.5 bolt pattern
- Offset of -19, backspacing of 4.75 and center bore of 106
- Member of the 950 Gauge series
Wide wheels and clearance
A 20 inch wheel with a 10 inch width and a -19 offset puts a wide, outward-set face near the fender and the suspension. Clearance is the first thing to test, because a tire that clears in the driveway can contact the fender once the suspension compresses or the steering turns. The 4.75 backspacing sets the room behind the face, so check it against the brake calipers and the inner suspension components too.
Tire choice matters as much as the wheel. A wider wheel needs a tire within the range its width is designed for, and the overall diameter of the tire affects speedometer reading and gearing. Regular inspection of the wheel lip, bead seat and valve stems helps catch problems early, especially on rough roads.
- Test clearance at full steering lock
- Check the inner brake caliper gap
- Match tire width to the wheel width
- Inspect the lip after curb contact
Specifications
| Brand | Raceline Wheels |
|---|---|
| Part number | RLW950B-21060-19 |
| Series | 950 Gauge |
| Diameter | 20 Inches |
| Width | 10 Inches |
| Bolt pattern | 6 on 5.5 |
| Offset | -19 |
| Center bore | 106 |
| Backspacing | 4.75 |
| Style | Spoke |
| Finish | Satin Black |
| Construction | Aluminum |
| Fitment label | Universal Fit |
Vehicle fitment
No vehicle is named for this wheel, so the fitment section cannot list a make, model or year. Universal Fit is the only fitment label on record.
Measure your current wheel’s offset and backspacing and compare them with the -19 offset and 4.75 backspacing here. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A -19 offset moves the mounting face further outward than standard, which can bring the tire into contact with the fender or suspension at full lock. Test clearance at full steering lock and with normal loads. A 106 center bore must match the hub, and a hub-centric ring may be needed. Confirm the lug seat type before ordering.
What’s included
Tires, lug nuts, center caps and valve stems are separate items, so arrange them for a complete setup.









