Overview
The Raceline Wheels Clutch RLW934B-78580-00 is a 17 x 8.5-inch aluminum spoke wheel in satin black, built for an 8 on 6.5 bolt pattern. It belongs to Raceline’s 934 Clutch series, a consumer wheel line the brand links to its off-road racing background.
Raceline & Allied Wheel describes its wheels as purpose built for performance. In this model the dimensions that decide fit are a 0 offset, a 125 center bore and 4.75 backspacing. The center bore is the hole that centers the wheel on the hub, and backspacing is the distance from the mounting face to the inner edge of the wheel, which affects brake and fender clearance.
Key features
- 17-inch diameter and 8.5-inch width
- 8 on 6.5 bolt pattern
- Spoke design with a satin black finish
- Aluminum construction
- Part of the 934 Clutch series
- 0 offset, 125 center bore and 4.75 backspacing
Lug nut care and torque
Lug nut seat style decides how the fastener clamps the wheel, and a mismatch can let the wheel loosen even when the nut looks tight. Check the hub studs for thread damage, clean any rust off the mounting face, and only use nuts that match the seat type. Hand-start every nut so the threads do not cross.
Torque should be applied in a star pattern and rechecked after the first drive and again after several trips on rough roads. Vehicles that carry heavy loads or tow may need more frequent checks. Keep the lug nuts and studs clean and dry so the torque reading stays accurate over time.
- Replace nuts that spin without tightening
- Look for stripped threads on each stud
- Clean the hub face before every wheel change
Specifications
| Brand | Raceline Wheels |
|---|---|
| Part number | RLW934B-78580-00 |
| Series | 934 Clutch |
| Wheel diameter | 17 inches |
| Wheel width | 8.5 inches |
| Bolt pattern | 8 on 6.5 |
| Center bore | 125 |
| Offset | 0 |
| Backspacing | 4.75 |
| Style | Spoke |
| Finish | Satin Black |
| Construction | Aluminum |
Vehicle fitment
This wheel carries the Universal Fit label, but a wheel only mounts correctly when its bolt pattern, center bore and offset match the vehicle’s hub. No vehicle is tied to this label, so confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The lug nut or bolt seat style must match the wheel’s seats, so choose fasteners that fit before mounting. Confirm the 8 on 6.5 pattern and the 125 center bore against the hub. A wheel that is not seated and tightened correctly can loosen, so treat mounting as a safety-critical job.
What’s included
Check the package contents for lug nuts, center caps and valve stems before starting the install.









