Overview
The G2 Axle and Gear 25-2096 is a minor ring and pinion installation kit for the GM 9.25 Inch IFS front axle. It provides the install parts for a gear swap in an independent front suspension differential when the bearings stay in place.
G2 aims the kit at an installer working on a newer vehicle that does not need new bearings. The 25-2096 contains a shim kit, replacement pinion nut, crush sleeve, pinion seal, ring gear bolts, silicone sealer, Loctite and gear marking compound.
Key features
- GM 9.25 Inch IFS front axle installation kit
- Minor kit with no bearings listed
- Shim kit for gear mesh setup
- Replacement pinion nut, crush sleeve and pinion seal
- Ring gear bolts supplied
- Sealer, Loctite and gear marking compound
Things to check
Before pulling the carrier, clean the housing and measure the bearing caps so they go back into their original positions. Bearings that stay in place need a careful look at the cup seats, because a worn cup bore can change the preload set with the crush sleeve. Replacing bearing cups is a separate task that calls for a press and new bearings, so plan for it if the seats show wear.
Gear sets for a 9.25 IFS carrier are sold apart and must be matched as a pair. Check the gear ratio against your drivetrain before buying, and keep ring and pinion together through the whole job. Fresh gear oil and a careful break-in drive help the new contact pattern settle in during the first miles.
- Clean and measure bearing caps before removal
- Inspect cup seats for wear
- Buy ring and pinion as one matched set
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 25-2096 |
| UPC | 631410095272 |
| Product type | Minor ring and pinion installation kit |
| Kit class | Minor kit |
| Axle manufacturer | GM |
| Axle type | GM 9.25 Inches IFS |
| Axle location | Front |
| Kit contents | Shim kit, replacement pinion nut, crush sleeve, pinion seal, ring gear bolts, silicone sealer, Loctite, gear marking compound |
Vehicle fitment
No vehicle list is given for the 25-2096. G2 labels the fit Universal Fit, and the kit is made for the GM 9.25 Inch IFS front axle, so you match the axle size instead of a stated year range.
The 25-2096 does not cover other GM axle sizes, such as the one that uses kit 25-2095, or rear axles. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the 25-2096 holds a crush sleeve, the pinion preload is set once during assembly, and the shims decide pinion depth. The kit has no gear set, so gears are bought on their own and the job is best left to a professional. The pinion seal keeps gear oil in the housing, and Loctite holds the ring gear bolts, so both are fresh parts during the swap. New gears need a careful break-in.
What’s included
- Shim kit
- Replacement pinion nut
- Crush sleeve
- Pinion seal
- Ring gear bolts
- Silicone sealer
- Loctite
- Gear marking compound
Not included: the ring and pinion and bearings.






