Overview
The Pro Comp 13128 is a rear add-a-leaf kit for Ford trucks in the 73–76 Ford F-Series, 78–96 Ford Bronco, 00–05 Ford Excursion and 99–07 Ford F-250 and F-350 Super Duty. Add-a-leaf kits are used when 1.5 to 2.5 inches of raised height is needed, and they strengthen an existing leaf spring pack.
The leaf is a single extra spring leaf added to the existing pack. The specifications list a flat length of 49.75 inches, CTR-PIN-CTR measurements of 22.25 by 27.50 inches, a 3.00-inch leaf width, a 0.325-inch leaf thickness, an 8.0-inch camber and a spring rate of 105 pounds per inch. The leaf is square, the center pin is included, and the kit is sold as a pair.
The leaf helps renew an older spring pack that has lost strength from age or heavy loads. The kit fits the rear position.
Key features
- Adds 1.5 to 2.5 inches of raised height
- Strengthens an existing leaf spring pack
- Square leaf style with center pin included
- Spring rate 105 pounds per inch
- Sold in a pair
Choosing lift and load
A leaf spring pack carries the weight of the rear axle and the load in the bed. Adding a leaf raises the rest height and increases stiffness, so the rear end sits higher and rides firmer, especially when the truck is empty. For a truck that tows or hauls regularly, the extra leaf can help the pack hold its height under load, which is why the kit is often fitted to older packs that have sagged.
Because a leaf changes the spring rate of the pack, the shocks, brake hoses and driveshaft angle may need checking after the lift. Longer shocks or extended brake hoses are sometimes needed at larger heights. Replace the U-bolts and hardware with new parts, and recheck the nuts after the first few drives, since new leaves can settle.
- Check rear axle pinion angle after the change
- Inspect the shackles and bushings for wear
- Replace U-bolts when the pack is reassembled
- Confirm brake hose length at the new height
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 13128 |
| Position | Rear |
| Flat length | 49.75 in |
| CTR-PIN-CTR | 22.25 in by 27.50 in |
| Leaf width | 3.00 in |
| Leaf thickness | 0.325 in |
| Camber | 8.0 in |
| Spring rate | 105 lb per in |
| Leaf style | Square |
| Quantity | Pair |
Vehicle fitment
The kit fits the 1973–1976 Ford F-100, F-150, F-250 and F-350 trucks in the F-Series range, the 1978–1996 Ford Bronco, the 2000–2005 Ford Excursion, and the 1999–2007 Ford F-250 and F-350 Super Duty.
Ford trucks outside these years, and F-Series trucks from 1977 onward, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
An add-a-leaf changes the spring pack, so check the existing springs and the shackle and hanger arrangement before installation. Plan a wheel alignment check after the height is changed.
What’s included
The add-a-leaf kit is sold as a pair and includes the center pin.
Not included: U-bolts and other spring pack hardware.









