Overview
The Pro Comp PRO-X shock, part EXP936008B, is a gas charged twin tube shock with a 35.9 inch extended length. It fits the 1999–2016 Ford F-250 and F-350 Super Duty and is made for trucks that have been lifted and need a longer shock than stock.
The shock is 20.4 inches collapsed and offers 16.02 inches of travel. Its 1-3/8 inch nylon banded piston and 5/8 inch chrome hardened shaft pair with velocity sensitive valving and nitrogen stabilization. The Teflon rebound stop gives a comfortable highway ride, and the shock handles demanding off-road driving.
Key features
- Gas charged twin tube design
- Nitrogen stabilized
- Velocity sensitive valving
- 1-3/8 in nylon banded piston
- 5/8 in chrome hardened shaft with a Teflon rebound stop
- Black powder coat finish
Lifted trucks and travel
A longer shock keeps its damping range when a truck sits higher than stock. Travel is the distance the shock can move between its collapsed and extended lengths, and running out of travel on a lifted truck means the suspension hits its limit before the shock does. Matching travel to the suspension height is a better guide than matching the stock part alone.
Super Duty trucks carry heavy loads, which puts extra stress on the shock mounts and bushings. Inspect the mounting hardware and rubber bushings at each service, and replace worn parts before they cause the shock to bind. Gas charged shocks also tend to hold their damping when the truck is loaded and driven hard over long distances.
- Measure travel before selecting a shock
- Replace worn bushings along with the shock
- Check mounts for elongated holes
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | EXP936008B |
| Shock series | PRO-X |
| Shock type | Twin tube, gas charged |
| Extended length | 35.9 in |
| Collapsed length | 20.4 in |
| Travel length | 16.02 in |
| Body diameter | 2.0 in |
| Piston | 1-3/8 in nylon banded |
| Shaft | 5/8 in chrome hardened |
| Mounts | Loop in the feature list, eyelet in the attribute table |
| Position | Universal |
Vehicle fitment
The fit covers 1999–2016 Ford F-250 Super Duty and F-350 Super Duty trucks across the trim levels covered. Earlier F-250 and F-350 trucks and the F-150 fall outside this fit.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure your existing shock mounts and compare them with the collapsed and extended lengths before ordering. The mount type is listed two ways, so check which one your truck uses.
With the truck at its ride height, compare the 20.4 inch collapsed and 35.9 inch extended lengths with the distance between the upper and lower mounts. The shock should be able to reach its full travel of 16.02 inches without bottoming out at either end of the stroke.
What’s included
One PRO-X shock absorber, part EXP936008B.
Not included: the shock boot, which is sold separately.







