Select your vehicle
-13%

Pro Comp PRO-X Twin Tube Shock Absorber – 924560B

Pro Comp Suspension

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • PRO-X twin tube gas shock, 24.5 inches extended and 14.5 inches compressed
  • 10 stage velocity sensitive valving
  • 5/8-inch chrome hardened piston rod with Teflon rebound stop
  • Shock boots sold separately

Description

Overview

The Pro Comp 924560B is a PRO-X gas-charged twin tube shock absorber with a 24.5-inch extended length and a 14.5-inch compressed length. It is sold individually. Confirm fit for your vehicle’s year, model and trim before ordering.

Pro Comp designed the PRO-X for vehicles that see a lot of paved roads with the occasional off-road trip. It is a general-purpose twin tube shock, offered in extended lengths for lifted trucks. It offers damping suited to varied road conditions.

The shock uses 10 stage velocity sensitive valving, which Pro Comp says adapts to varied road conditions and improves handling. Its 5/8-inch chrome hardened piston rod and Teflon rebound stop give a comfortable highway ride and the ability to handle demanding driving conditions.

The body is 2.0 inches in diameter, with a travel length of 10.01 inches. It has a stem top mount and an eyelet bottom mount. Shock boots are sold separately.

Key features

  • 10 stage velocity sensitive valving
  • 5/8-inch chrome hardened piston rod
  • Teflon rebound stop
  • Gas charged twin tube design
  • Stem top mount and eyelet bottom mount
  • Extended lengths for lifted trucks

Mounts and bushings

The mounting hardware at each end of a shock carries the load of every bump, so the bushings and bolts matter as much as the damper itself. Eyelet and loop mounts use a bushing or sleeve, and worn rubber can let a shock clunk or slap over rough ground. Inspect the bushings at each mount when you replace the shock, and replace any that are cracked or flattened.

Good installation also depends on a clean mounting surface and correct bolt torque. Use a torque wrench, follow the fastener values for your vehicle, and re-check the mounts after the first short drive. A shock that is pulled into place at a bind will wear out sooner than one that sits free.

Specifications

Brand Pro Comp Suspension
Part number 924560B
Shock series PRO-X
Shock type Twin tube
Location Universal
Charge Gas charged
Top mount Stem top
Bottom mount Eyelet
Body diameter 2.0 inches
Compressed length 14.5 inches
Extended length 24.5 inches
Travel length 10.01 inches
Piston rod 5/8-inch chrome hardened
Sold as Individually

Vehicle fitment

Confirm fit by comparing the compressed and extended lengths and the mounts with your current shock before ordering.

Shocks are sized by length and mount type, so check those measurements against your vehicle before ordering.

Installation notes

Shock boots are sold separately, so order a boot if your setup needs one. The shock is sold individually, so a full set needs one order per shock.

What’s included

One twin tube shock, sold individually. Shock boots are sold separately.

Questions & Answers

What are the extended and compressed lengths of the 924560B?

The shock is 24.5 inches extended and 14.5 inches compressed, with a 10.01-inch travel length. Its body is 2.0 inches in diameter.

Is this shock meant for off-road use only?

No. It is designed for vehicles that see a lot of paved roads with the occasional off-road trip, and it gives a comfortable highway ride while handling demanding conditions.

Does the PRO-X come with a boot?

No. Shock boots are sold separately, and this shock is sold individually, so a boot is an extra purchase if you want one.

What is the piston rod size?

The piston rod is 5/8 inch and chrome hardened, and the shock uses a Teflon rebound stop. Pro Comp says these features support a comfortable highway ride.

Do I need new bushings when I replace the shock?

Replace bushings if they are cracked, torn or flattened. Old bushings can make a new shock knock or wear unevenly, so inspect them at both ends of the shock during installation.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon