Overview
The Pro Comp 934000B is a PRO-X twin tube shock absorber with a 34-inch extended length, a 19.4-inch collapsed length and a 14.05-inch travel length. It has eyelet mounts at both ends and a 2.0-inch body, and it is a universal-location shock.
The PRO-X is a general-purpose twin tube design for vehicles that see mostly paved roads with occasional off-road driving. Pro Comp uses 10-stage velocity sensitive valving to handle varied road conditions, along with a 1-3/8-inch nylon banded piston and a 5/8-inch chrome hardened shaft.
The shock is nitrogen stabilized and has a black powder-coated finish. Because a shock with these lengths is sized for particular vehicles, confirm fit for your vehicle’s year, model and trim before choosing it.
Key features
- Twin tube design for general-purpose use
- 10-stage velocity sensitive valving
- 1-3/8-inch nylon banded piston
- 5/8-inch chrome hardened shaft
- Eyelet mounts at both ends
- Black powder-coated finish
Measuring before you buy
Shocks with long extended and collapsed lengths are built around a particular suspension geometry, so measuring the installed shock is the most reliable first step. Record the mounted length at the top and bottom eyes, then compare it with the extended and collapsed lengths of the new unit. Note the mount positions on the vehicle as well, since eyelet ends may need matching hardware.
Eyelet mounts usually take a bolt or pin through a fixed hole, so check the hole size and bushing thickness on both ends before you buy. Look for loose or worn bushings, cracked brackets and seepage on the old shock to confirm it needs replacing. If the new unit will sit at a different angle, a bracket adjustment or spacer may be needed, so check that before final tightening.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 934000B |
| Shock series | PRO-X |
| Shock type | Twin tube, gas charged (nitrogen stabilized) |
| Location | Universal |
| Extended length | 34 in |
| Collapsed length | 19.4 in |
| Travel length | 14.05 in |
| Body diameter | 2.0 in |
| Piston | 1-3/8 in nylon banded |
| Shaft | 5/8 in chrome hardened |
| Upper mount | Eyelet |
| Lower mount | Eyelet |
| Finish | Black powder coat |
| Boot | Optional, not included |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. Measure the installed shock and compare it with the 34-inch extended and 19.4-inch collapsed lengths.
Because no vehicles are listed, do not assume fit from the part name alone. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure the installed shock or suspension before ordering, since the 34-inch extended length is long. Check the eyelet mounts against the existing hardware before fitting.
What’s included
One twin tube shock with eyelet mounts at both ends. The optional boot is not included.
Not included: the optional boot.









