Overview
The Pro Comp 929508B is a PRO-X twin tube shock absorber for the 2000–2005 Ford Excursion and the 2000–2005 F-250 and F-350 Super Duty. It has a 29.8-inch extended length, a 17.3-inch collapsed length and a 12.45-inch travel length, and it is designed for the Super Duty’s longer suspension travel.
The PRO-X is a general-purpose twin tube design for heavy trucks and SUVs that spend most of their time on pavement, with some off-road use. The 10-stage velocity sensitive valving is meant to handle different road conditions, and the 1-3/8-inch nylon banded piston and 5/8-inch chrome hardened shaft are the primary working components.
Both mounts are loop eyes, and the body is 2.0 inches in diameter with a black powder-coated finish. The gas charge is nitrogen stabilized. The optional shock boot is not included.
Key features
- Twin tube design for general-purpose use
- 10-stage velocity sensitive valving
- 1-3/8-inch nylon banded piston
- 5/8-inch chrome hardened shaft
- Loop eyes at both ends
- Black powder-coated finish
Heavy-duty shock service
Heavy trucks and full-size SUVs put a lot of load through the rear shocks, especially when towing or carrying a full bed. Shocks on these vehicles often wear before the springs do, so a worn shock can show up as a floating rear end or a bounce that lingers after a bump. Check the eyes and mounting hardware along with the shock body when inspecting the rear suspension.
Tires, wheel weight and payload all influence how the rear suspension behaves, so choose shocks that suit how the truck is used most. If the vehicle carries heavy loads regularly, inspect the shocks and bushings more often and tighten fasteners after the first few drives with new parts. Keep the shock body clean of road grime so leaks are easier to spot.
- Look for leaks around the body
- Check eye bushings for wear
- Re-torque mounting bolts after first drives
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 929508B |
| Shock series | PRO-X |
| Shock type | Twin tube, gas charged (nitrogen stabilized) |
| Location | Universal |
| Extended length | 29.8 in |
| Collapsed length | 17.3 in |
| Travel length | 12.45 in |
| Body diameter | 2.0 in |
| Piston | 1-3/8 in nylon banded |
| Shaft | 5/8 in chrome hardened |
| Upper mount | Loop |
| Lower mount | Loop |
| Finish | Black powder coat |
| Boot | Optional, not included |
Vehicle fitment
It fits the 2000–2005 Ford Excursion in the Eddie Bauer, Limited, XLS and XLT trims, and the 2000–2005 F-250 and F-350 Super Duty in the Harley-Davidson Edition, King Ranch, Lariat, XL and XLT trims.
Excursion and Super Duty models from 2006 onward are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the installed suspension height against the 29.8-inch extended and 17.3-inch collapsed lengths before fitting, and confirm the loop eyes clear the axle at full droop. The Super Duty is a heavy truck, so check the bracket hardware for wear before installing.
What’s included
One twin tube shock with loop eyes at both ends. Boot not included.
Not included: the optional boot.









