Overview
The Pro Comp PRO-M Monotube Front Shock Absorber, part number PR2013 (EXPPR2013), is a nitrogen gas charged monotube shock for 1999-2004 Ford F-250 Super Duty and F-350 Super Duty trucks with a 6.5 inch lift. The PRO-M series delivers fast reaction and consistent ride quality on and off the road.
The shock measures 27.1 inches extended and 17 inches compressed, with loop mounts at both ends, a silver powder coat finish and a polyurethane shock boot. An internal floating piston separates the oil from the nitrogen charge to reduce cavitation.
Key features
- Monotube design with nitrogen gas charge
- Internal floating piston separates oil from gas
- Multi-stage valving and a multi-stage disc pack
- Vehicle specific valving
- 14mm chrome hardened shaft
- Polyurethane shock boot included
- Loop (eyelet) upper and lower mounts
- Silver powder coat finish
- For models with a 6.5 inch lift
- Sold individually
Tuning the shock to your lift
A 6.5 inch lift raises the axle and changes the angle of the shock, which means the usable travel is different from a stock truck. Before installing, confirm the shock reaches full extension and compression without binding, and check that the brake lines and steering components have clearance through the full range.
Heavy-duty trucks carry extra weight, so the damping and the mount bushings see more load over time. Monotube shocks with a floating piston are designed to keep damping steady as the oil warms, which is useful on long grades and rough roads.
Replace the mounting hardware if it shows wear, and recheck the bolts after the first drive. A worn shock often makes the front end feel loose, so inspect for oil seepage and listen for knocking over bumps.
- Verify full travel with the truck on the ground
- Inspect the loop bushings for cracks
- Check brake line clearance at full droop
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | PR2013 |
| Alternate part number | EXPPR2013 |
| Product type | Front shock absorber |
| Series | PRO-M |
| Shock type | Monotube |
| Position | Front |
| Extended length | 27.1 inches |
| Collapsed length | 17 inches |
| Upper mount | Loop (eyelet) |
| Lower mount | Loop (eyelet) |
| Shaft | 14mm chrome hardened |
| Finish | Silver powder coat |
| Gas charge | Nitrogen |
| Lift height | For models with 6.5 inch lift |
| Quantity | Individual shock |
| Boot | Polyurethane boot included |
| Fitment type | Direct fit |
Vehicle fitment
The PR2013 front shock fits the 1999-2004 Ford F-250 Super Duty and F-350 Super Duty in Harley-Davidson Edition, King Ranch, Lariat, XL and XLT trims.
The shock is intended for a 6.5 inch lift. The list does not include other model years or other Ford trucks, such as the F-150. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This monotube shock has loop mounts at both ends. Tighten the mounting bolts with the vehicle’s weight on the suspension so the bushings are not preloaded, and confirm the shock does not bind or touch brake lines at full droop and full compression, which matters most on a lifted vehicle.
What’s included
- One front PRO-M monotube shock
- Polyurethane shock boot









