Overview
The Pro Comp Suspension PR2133 is a PRO-M front monotube shock designed for Super Duty trucks with an 8 inch lift. It fits the 2017 to 2022 Ford F-250 Super Duty and the 2017 to 2021 Ford F-350 Super Duty, and it is sold individually.
The shock has an extended length of 29.4 inches and a collapsed length of 19 inches. It is nitrogen gas charged, and the floating piston keeps oil and gas separate for steadier damping.
Key features
- Front monotube design for an 8 inch lift
- Extended length 29.4 inches, collapsed length 19 inches
- Nitrogen gas charged with floating piston
- Multi-stage disc pack valving, vehicle specific
- 14 mm chrome hardened shaft
- Polyurethane shock boot included
Geometry after a large lift
An 8 inch lift changes front geometry substantially, so the damper is only one part of the work. Caster, camber, toe and driveline angles should be measured after the lift is installed, and the front spring and steering components may need adjustment to match. Compare the extended and collapsed lengths with the shock being removed, since the length difference sets how far the truck sits above its previous height.
Front shocks on a large-lift Super Duty carry more of the truck’s movement, so bushings and eyelet mounts see more load. Inspect them early and often, especially after rough trail use. Leaking oil, a loose mount or a clunk over bumps are signs the shock is worn and should be replaced in pairs so both sides of the axle keep the same damping.
- Measure caster and toe after the lift
- Check driveline angles and u-joint wear
- Inspect eyelet bushings at each service
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | EXPPR2133 |
| Shock series | PRO-M |
| Position | Front |
| Extended length | 29.4 in |
| Collapsed length | 19 in |
| Lift | 8 in |
| Shaft | 14 mm chrome hardened |
| Finish | Silver powder coat |
Vehicle fitment
It fits the 2017 to 2022 Ford F-250 Super Duty and the 2017 to 2021 Ford F-350 Super Duty, in several trims including King Ranch, Lariat, Limited, Platinum, XL and XLT.
It is made for 2017 to 2022 F-250 and 2017 to 2021 F-350 Super Duty trucks. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
An 8 inch lift changes the front geometry a great deal, so the alignment, the driveline angles and the steering geometry should be checked after installation. The 29.4 inch extended and 19 inch collapsed lengths must be compared with the front shock being removed, because the difference determines how the truck sits. Check the eyelet mounts and the boot before the truck is driven on rough ground.
An 8 inch lift changes the front geometry substantially, so check the alignment, the steering components and the driveline angles after installation. Confirm the eyelet mounts are tight and the shock body clears the front spring at full compression.
Confirm the front shock clears the steering linkage and the brake hoses at full steering lock, since an 8 inch lift moves those components a long way.
What’s included
One PRO-M front monotube shock with polyurethane boot under part number EXPPR2133.









