Overview
The Pro Comp 936000B is a PRO-X twin tube shock absorber with a 35.9-inch extended length, a 20.4-inch collapsed length and a 16.02-inch travel length. It has eyelet mounts at both ends and a 2.0-inch body, and it is a universal-location shock.
The PRO-X is a general-purpose twin tube design for vehicles that see mostly paved roads with occasional off-road driving. It has 10-stage velocity sensitive valving, a 1-3/8-inch nylon banded piston and a 5/8-inch chrome hardened shaft, and Pro Comp describes its Teflon rebound stop as supporting a comfortable highway ride.
The shock is nitrogen stabilized and finished in black powder coat. Its lengths suit specific vehicles, so measure your suspension before choosing it.
Key features
- Twin tube design for general-purpose use
- 10-stage velocity sensitive valving
- 1-3/8-inch nylon banded piston
- 5/8-inch chrome hardened shaft
- Eyelet mounts at both ends
- Black powder-coated finish
Long-stroke shock fitment
A stroke this long changes how the shock sits in the installed suspension. At full droop the shock must extend without binding, and at full compression the body must clear the axle, frame and brake lines. Measure both positions before buying, because a shock that works at one ride height may strike a part at another.
Eyelet mounts carry the shock’s load through a pin or bolt, so the bushings and mounting holes should be checked for wear before installation. Long shocks also see more travel-related stress, so inspect the eyelets, any adapter brackets and the bolts after the first few drives. Recheck clearance once the vehicle has settled under its normal load.
- Confirm clearance at full droop
- Check eyelet bushings and pins
- Inspect adapter brackets for cracks
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 936000B |
| Shock series | PRO-X |
| Shock type | Twin tube, gas charged (nitrogen stabilized) |
| Location | Universal |
| Extended length | 35.9 in |
| Collapsed length | 20.4 in |
| Travel length | 16.02 in |
| Body diameter | 2.0 in |
| Piston | 1-3/8 in nylon banded |
| Shaft | 5/8 in chrome hardened |
| Upper mount | Eyelet |
| Lower mount | Eyelet |
| Finish | Black powder coat |
| Boot | Optional, not included |
Vehicle fitment
Verify the year, model and trim against your vehicle before ordering. Compare the 35.9-inch extended and 20.4-inch collapsed lengths with your installed suspension first.
Because no vehicles are listed, do not assume fit from the part name alone. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure the installed shock or suspension before ordering, since the 35.9-inch extended length is long for a standard shock. Check the eyelet mounts against the existing hardware.
What’s included
One twin tube shock with eyelet mounts at both ends. The optional boot is not included.
Not included: the optional boot.









