Overview
The Pro Comp PRO-X Twin Tube Shock Absorber, part number 923553B, is a twin tube shock with a stem top mount and a 23.54 inch extended length. It fits the 2007–2014 Toyota FJ Cruiser, including the Base, Trail Teams Special Edition and TRD Special Edition versions.
The PRO-X is a general-purpose twin tube design for vehicles that see mostly paved roads with occasional off-road use. Pro Comp says its 10 stage velocity sensitive valving handles a range of road conditions and improves handling.
The 5/8 inch chrome hardened piston rod and a Teflon rebound stop are meant to give a comfortable highway ride. Travel length is 9.48 inches, compressed length is 14.2 inches and the body diameter is 2.0 inches.
The shock suits vehicles that see a lot of paved roads with occasional off-road use. Its velocity sensitive valving responds to how quickly the shock moves, which accommodates various road conditions. The 1-3/8 inch nylon banded piston and 5/8 inch chrome hardened piston rod are the main internal components, and the Teflon rebound stop adds comfort on the highway.
Key features
- 10 stage velocity sensitive valving
- 5/8 inch chrome hardened piston rod
- Teflon rebound stop
- Nitrogen stabilized
- 1-3/8 inch nylon banded piston
- Black powder coat finish
FJ Cruiser shock setup
The FJ Cruiser sits on a body-on-frame platform with a relatively long suspension stroke, so shocks are asked to control both axle and body movement. A twin tube design with velocity sensitive valving gives a steady feel on highways and dampens the rough sections of gravel road. Choosing a shock with the right stem mount and length keeps the travel in the correct range.
Check the upper stem mount bushing and the bolt that holds it, since stem mounts depend on clean, tight hardware. Inspect the lower mount and bushings for cracking or sagging. After replacing shocks, check wheel alignment only if the tire wear pattern suggests a problem, and recheck mounting torque after the first few drives. Keep the shaft and seal clean after trail use.
- Inspect upper stem mount bushings
- Check lower mount for cracks
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 923553B |
| Shock series | PRO-X |
| Shock type | Twin tube |
| Extended length | 23.54 in |
| Compressed length | 14.2 in |
| Travel length | 9.48 in |
| Body diameter | 2.0 in |
| Upper mount | Stem |
| Piston | 1-3/8 inch nylon banded |
| Piston rod | 5/8 inch chrome hardened |
| Finish | Black powder coat |
Vehicle fitment
It fits the 2007–2014 Toyota FJ Cruiser.
Other Toyota models and years outside 2007–2014 are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The shock is sold individually and shock boots are sold separately, so decide on boots before installation if your setup needs them.
What’s included
One shock absorber. Not included: the optional shock boot, which is sold separately.









