Overview
The Pro Comp Suspension PR2112 is a PRO-M front monotube shock for Ram 2500 and Ram 3500 trucks from 2014 to 2021 with a 2 inch lift. It is sold individually and has an extended length of 22.7 inches.
The nitrogen charge and floating piston help resist cavitation, which can cause a loss of damping, and the larger body holds more oil to dissipate heat during off-road use.
Key features
- Front monotube design for a 2 inch lift
- Extended length 22.7 inches, collapsed length 15 inches
- Nitrogen gas charged with floating piston
- Multi-stage disc pack valving
- 14 mm chrome hardened shaft
- Polyurethane shock boot included
Heavy duty alignment after a lift
Heavy duty pickups carry more weight at the front, so a lift changes the load path through the springs, shocks and steering. After a lift, the caster and toe usually need to be checked by an alignment shop before the truck is driven far. A front shock installed while the suspension is changing can bind if the mounts are not square.
Upgrades often travel together. A lift may call for longer brake lines, extended steering links or a rebuilt track bar, depending on how the truck was set up. Inspect the factory bump stops and the boot after installation, and check that the shock body has room at full steering lock. Retighten the mounting hardware after the first few drives.
- Check caster and toe after the lift
- Inspect brake hoses for stretch
- Recheck mounting bolts after the first drives
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | EXPPR2112 |
| Shock series | PRO-M |
| Position | Front |
| Extended length | 22.7 in |
| Collapsed length | 15 in |
| Lift | 2 in |
| Shaft | 14 mm chrome hardened |
| Finish | Silver powder coat |
Vehicle fitment
It fits the 2014 to 2021 Ram 2500, in several trims including Big Horn, Laramie, Power Wagon and Tradesman, and the 2014 to 2021 Ram 3500, in several trims including Laramie, Limited and Tradesman.
Verify the year, model and trim of your Ram before placing an order.
Installation notes
Compare the 22.7 inch extended and 15 inch collapsed lengths with the front shock being replaced, since a 2 inch lift changes the front ride height on a heavy duty Ram. The stem top mount should be checked against the factory upper bracket, and the lower loop should line up with the axle. Confirm the 2 inch body clears the front spring at full compression.
A 2 inch lift on a Ram 2500 or 3500 changes the front geometry, so have the alignment checked after installation. Confirm the stem top and lower loop are seated in the factory brackets, and that the shock clears the front spring at full compression.
Check the front shock clears the steering linkage and the brake lines at full lock, and confirm the boot is seated fully.
What’s included
One PRO-M front monotube shock with polyurethane boot under part number EXPPR2112.









