Overview
The Pro Comp PR2117 is a PRO-M monotube rear shock absorber for the 2014–2021 Ram 2500 and the 2014 Ram 3500, sized for trucks with a 6-inch lift. It has a 26.8-inch extended length and a 17.5-inch collapsed length, measured as the shock’s own dimensions.
A floating piston inside the monotube body keeps the oil away from the nitrogen gas, so the damping holds up when the shock is working hard. The valving is built for this application, and the 2.0-inch body gives the oil more room to manage heat on long, rough runs.
The shock uses a stem upper mount and a loop lower mount, a 14mm chrome hardened shaft and a silver powder-coated body. A polyurethane shock boot is included, and the wiper seal has been redesigned. Pro Comp rates this version for models with a 6-inch lift, which is the figure to compare with the installed suspension.
Key features
- Monotube body with an internal floating piston
- Multi-stage disc pack valving
- 2.0-inch shock body with added oil capacity
- Redesigned wiper seal
- 14mm chrome hardened shaft
- Silver powder-coated finish
Matching the shock to your lift
A 6 inch lift changes how far the rear axle travels before the shock reaches its limit. Compare the installed height with the extended and collapsed lengths, and make sure the stem upper mount reaches its bracket without strain. A shock that is out of range can wear mounts, bind at full extension or limit suspension travel.
Ask whether the springs, bump stops and bushings are in good condition, since they share the load with the shock. Worn parts can make a new damper feel harsh or loose. Test the shock by hand for smooth movement, then recheck the mounts after the first drive on rough ground. Light trail use should be followed by a quick look at the bolts.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | PR2117 |
| Shock series | PRO-M |
| Shock type | Monotube, nitrogen gas charged |
| Position | Rear |
| Extended length | 26.8 in |
| Collapsed length | 17.5 in |
| Shock body diameter | 2.0 in |
| Shaft | 14mm chrome hardened |
| Upper mount | Stem |
| Lower mount | Loop |
| Finish | Silver powder coat |
| Lift height | With a 6-inch lift |
| Boot | Polyurethane, included |
Vehicle fitment
It fits the 2014–2021 Ram 2500 in the Big Horn, Laramie, Laramie Longhorn, Outdoorsman, Power Wagon, SLT, Tradesman and other trims, and the 2014 Ram 3500 in the Laramie, Lone Star, SLT and Tradesman trims.
The Ram 1500 and Ram 3500 models from 2015 onward are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This shock is rated for a 6-inch lift, so measure the installed length before ordering. Check the stem upper mount against its bracket at full extension before final tightening.
What’s included
Included are one rear shock, its stem upper mount and a polyurethane boot. Confirm the mounting pieces match your installation before starting.









