Overview
The Pro Comp Pro Runner PRO-M monotube shock absorber, part number EXPPR2102, is a rear nitrogen gas charged monotube shock for 1969–1991 Chevrolet and GMC K-series trucks, Blazers and Jimmys with a 6 in. lift.
The PRO-M monotube uses an internal floating piston to separate the oil from the nitrogen gas charge, which helps prevent cavitation. Multi-stage valving is tuned to each application. The 2.0 shock body holds more oil, which improves heat dissipation during off-road use. It is sold individually and includes a polyurethane shock boot.
Key features
- PRO-M monotube design, nitrogen gas charged
- Internal floating piston separates oil from the nitrogen charge
- Multi-stage disc pack with vehicle specific valving
- 14mm chrome hardened shaft
- 2.0 shock body for increased oil capacity
- 29.7 inch extended length, 18.4 inch collapsed length
- Loop upper mount and loop lower mount
- Silver powder coat finish with polyurethane shock boot included
- Rear position, for models with a 6″ lift
Choosing a replacement rear shock
A rear shock controls how quickly the spring compresses and rebounds, which affects body control on rough roads and under braking. On a lifted truck the shock works through a longer range of travel, so its length and mounting style matter as much as its damping. Monotube designs keep the damping oil apart from the gas charge, which supports steady performance when the truck is driven hard over long grades.
Before buying, measure the mounts on your current shock and compare them with the new unit. Worn bushings, oil on the shock body and a knock over bumps are common signs the old shock needs replacing. Replacing both rear shocks together keeps the ride even from side to side.
- Check the eye size and bushing type on both mounts
- Inspect the boot for tears and grit
- Look for oil residue along the shaft
- Replace worn mounting hardware with the shock
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | EXPPR2102 |
| Product type | Monotube shock absorber |
| Series | PRO-M |
| Position | Rear |
| Lift height | 6 in. lift |
| Extended length | 29.7 inches |
| Collapsed length | 18.4 inches |
| Upper mount | Loop (eyelet) |
| Lower mount | Loop (eyelet) |
| Shaft | 14mm chrome hardened |
| Type | Monotube, nitrogen gas charged |
| Valving | Multi-stage disc pack, vehicle specific |
| Finish | Silver powder coat |
| Boot | Polyurethane shock boot included |
| Sold as | Individually |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer fitment list for the Pro Comp EXPPR2102 covers Chevrolet and GMC models, including the 1973–1974 and 1987–1991 Chevrolet Blazer, 1969–1986 K10 and K20 pickups, 1973–1986 K10 and K20 Suburban, 1975–1986 K5 Blazer, the 1987 V10 and V20 and 1987–1988 V10 and V20 Suburban, the 1973–1991 GMC Jimmy, and 1969–1986 GMC K15, K1500, K25 and K2500 pickups. Trim levels such as Cheyenne, Scottsdale and Silverado vary by model and are in the stored fitment list.
It fits the Chevrolet and GMC models and years covered above. Later full-size trucks and other brands are not covered. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Suspension components affect handling and braking, so professional installation is advised. Use the correct torque for each fastener before driving.
- Have the alignment checked after any suspension work.
- Check tire clearance and brake hose and wiring length through the full range of travel.
- Re-check fasteners after the first miles of driving.
- Check your local regulations on suspension height changes.
- Shocks are best replaced in pairs so the left and right sides match.
What’s included
- One monotube shock
- One polyurethane shock boot









