Overview
The Pro Comp PRO-X Twin Tube Shock Absorber, part number EXP934005B, is a rear shock for 4 to 6 inch lift applications, with a 34 inch extended length and loop mounts at both ends.
Designed for vehicles that see mostly paved roads with occasional off-road use, with extended lengths for lifted trucks. The 10-stage velocity-sensitive valving handles a range of road conditions and supports good handling. The Teflon rebound stop and 5/8 inch chrome hardened shaft support a comfortable highway ride and demanding driving.
The 5/8 inch chrome hardened shaft and the Teflon rebound stop are described by Pro Comp as delivering a comfortable highway ride and the ability to handle demanding driving. The 1-3/8 inch nylon-banded piston sits in a 2.0 inch body diameter.
The shock is gas charged and nitrogen stabilized, with a black powder coat finish. Its collapsed length is 19.4 inches and its travel is 14.05 inches. A shock boot is a separate part.
It fits the 2017 through 2021 Ford F-250 and F-350 Super Duty. Confirm fit for your vehicle’s year, model and trim before ordering.
Key features
- Rear position, for 4 to 6 inch lift applications
- Loop upper and lower mounts
- Gas charged and nitrogen stabilized
- 10-stage velocity-sensitive valving
- Teflon rebound stop
- 5/8 inch chrome hardened piston rod
- Black powder coat finish
Rear shocks and lift height
A rear shock works against the springs at the back axle and carries much of the load when the truck flexes over uneven ground. Raising the truck changes the shock’s angle and the length it must cover, so a shock that is too short can limit articulation while one that is too long can strain the lower mount at full droop.
Rear shocks often wear faster than front ones on heavy-bed trucks. Inspect the loop mounts for cracks and the bushings for hardening, and replace both shocks on the same axle so the rear ride stays even. Keep the black powder coat finish free of chips to slow corrosion at the rod.
- Check the loop mounts for cracks
- Replace rear shocks in pairs
- Recheck mount bolts after the first few drives
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | EXP934005B |
| Shock series | PRO-X |
| Shock type | Twin tube, gas charged, nitrogen stabilized |
| Position | Rear |
| Lift application | 4 to 6 inches |
| Extended length | 34 inches |
| Collapsed length | 19.4 inches |
| Travel length | 14.05 inches |
| Body diameter | 2.0 inches |
| Upper mount | Loop |
| Lower mount | Loop |
| Piston | 1-3/8 inch nylon-banded |
| Piston rod | 5/8 inch chrome hardened |
| Valving | 10-stage velocity sensitive |
| Rebound stop | Teflon |
| Finish | Black powder coat |
| Shock boot | Separate part, not included |
| Quantity | 1 (each) |
Vehicle fitment
Covers 2017 through 2021 Ford F-250 and F-350 Super Duty models
Other Super Duty years and Ford F-series models are not on the list.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The shock is made for 4 to 6 inch lifts, so match it to your truck’s lift height before installing it.
Measure the installed length of the rear shock you are replacing and compare it with the 34 inch extended and 19.4 inch collapsed lengths.
What’s included
One PRO-X rear twin tube shock absorber, part EXP934005B.
Not included: the shock boot, which is a separate part.









