Overview
The Pro Comp Suspension PR2037 is a PRO-M front monotube shock for 0 to 2 inches of lift. It fits 2011 to 2026 Chevrolet Silverado 2500 HD and GMC Sierra 2500 HD, 2011 to 2017 Silverado 3500 HD, 2011 to 2017 and 2019 Sierra 3500 HD, and the 2021 Ram 2500.
The shock is nitrogen gas charged, and a floating piston separates oil from the gas. Its body holds extra oil, which supports heat dissipation during off-road use.
Key features
- Front monotube design for 0 to 2 inches of lift
- 2 inch diameter body
- Extended length 18.4 inches, collapsed length 14.4 inches
- Nitrogen gas charged with floating piston
- Multi-stage disc pack valving
Choosing a mount style
Mount style is one of the first things to confirm on any front shock swap, because eyelet and loop ends use different hardware and bushings. Matching the shock to the factory bracket keeps the damper aligned, so it does not load the seals sideways. A shock with the wrong end style may bind at full travel, and that can shorten its life quickly.
Two-inch bodies give a larger oil reservoir and a firmer feel under load, which suits heavier pickups running a modest lift. The damper’s job is to control spring movement, so it works best when the spring rate and ride height are right. Consider inspecting the bump stops and spring seats at the same time, since a worn stop can make a shock appear to fail.
- Compare eyelet and loop ends first
- Inspect spring seats for corrosion
- Check bump stops for cracks
- Retighten mount hardware after a short drive
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | EXPPR2037 |
| Shock series | PRO-M |
| Position | Front |
| Body diameter | 2 in |
| Extended length | 18.4 in |
| Collapsed length | 14.4 in |
| Upper and lower mount | Eyelet or loop, confirm against factory brackets |
| Lift | 0 to 2 in |
| Finish | Silver powder coat |
Vehicle fitment
It fits the 2011 to 2026 Chevrolet Silverado 2500 HD and GMC Sierra 2500 HD, the 2011 to 2017 Silverado 3500 HD, the 2011 to 2017 and 2019 Sierra 3500 HD, and the 2021 Ram 2500 in several trims.
Check the year, model and trim against your own vehicle before buying, including 1500 models and other Ram years.
Installation notes
Compare the 18.4 inch extended and 14.4 inch collapsed lengths with the front shock being removed, since length sets ride height at the front. Confirm the truck is within the 0 to 2 inch lift range, and check the 2 inch body for clearance against the front spring at full compression. Confirm mount style against factory brackets before fitting.
Once installed, confirm the shock body clears the front spring and the frame at full compression. Check that the mounts are seated square and that the 2 inch body does not contact the inner fender. Test the travel by hand after installation to confirm the damper moves smoothly.
What’s included
One PRO-M front monotube shock under part number EXPPR2037.









