Overview
The Pro Comp Suspension PR2001 is a PRO-M front monotube shock for trucks with 3 to 6 inches of lift. It has an extended length of 29.6 inches and a collapsed length of 18.4 inches, and it is sold individually.
The shock is nitrogen gas charged, with a floating piston that keeps the oil and gas separate. The larger shock body provides extra oil capacity to help dissipate heat during off-road use.
Key features
- Front monotube design for 3 to 6 inches of lift
- Extended length 29.6 inches, collapsed length 18.4 inches
- Nitrogen gas charged with floating piston
- Multi-stage disc pack valving, vehicle specific
- 14 mm chrome hardened shaft
- Polyurethane shock boot included
Matching a shock to lift
A shock that covers 3 to 6 inches of lift is a broad range, so the truck’s actual height matters more than the model name. Measure the front ride height at the wheel center and compare it with the old shock’s extended and collapsed lengths. A shock that is too long can bind at full droop, and a shock that is too short can run out of travel on bumps.
Because this range covers many pickups, the front suspension on each truck is different. Check the upper and lower mounts, the spring seat and the boot for clearance, and confirm the steering stops are not affected. Front shocks are often replaced with the bushings and boots at the same time. Look for oil on the body, uneven front tire wear, or a clunk over bumps as signs the old unit is worn.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | EXPPR2001 |
| Shock series | PRO-M |
| Position | Front or rear, to match the wheel being replaced |
| Extended length | 29.6 in |
| Collapsed length | 18.4 in |
| Upper and lower mount | Loop |
| Lift | 3 to 6 in |
| Shaft | 14 mm chrome hardened |
| Finish | Silver powder coat |
Vehicle fitment
It fits a wide range of pickups, including Chevrolet Silverado and GMC Sierra 1500, 1500 HD, 2500, 2500 HD and 3500 models from 1999 to 2018 and up to 2016, depending on series. It also fits Dodge Ram 1500 from 2003 to 2008 and 2011 to 2026, Ram 2500 from 2003 to 2012, and Ram 3500 from 2014 to 2021.
The year ranges differ by model, so check your exact model and year against the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This shock covers 3 to 6 inches of lift and has a 29.6 inch extended length and an 18.4 inch collapsed length, so measure the truck’s lift before ordering. Match the exact year and series to your truck, since fit varies across GM and Ram models. Inspect the loop mounts at both ends, and make sure the polyurethane boot clears the body at full compression.
The 3 to 6 inch lift range covers a broad set of trucks, so the lift height has to be measured before ordering. Check that the loop mounts line up with the factory brackets and that the shock has clearance from the axle and frame at full compression.
What’s included
One PRO-M front monotube shock with polyurethane boot under part number EXPPR2001.









