Overview
The Pro Comp PRO-X twin tube shock, part EXP921500B, has a 21.6 inch extended length and fits 1977 to 1991 Chevrolet and GMC full-size trucks, Suburbans, Blazers and Jimmys.
The PRO-X is built for vehicles that see mostly paved roads with occasional off-road use, and its extended lengths suit lifted trucks. Its 10-stage velocity-sensitive valving adapts to varied road conditions and improves handling.
The 5/8 inch chrome hardened piston rod and Teflon rebound stop support a comfortable highway ride and demanding driving. The piston is a 1-3/8 inch nylon-banded design.
It is gas charged and nitrogen stabilized, with a 2.0 inch body diameter, 7.60 inches of travel and a black powder coat finish. It is a universal position shock, so the truck’s mount points determine the fit.
Key features
- Twin tube design with 10-stage velocity-sensitive valving
- Gas charged and nitrogen stabilized
- 5/8 inch chrome hardened piston rod
- Teflon rebound stop
- 1-3/8 inch nylon-banded piston
- 2.0 inch body diameter
- Black powder coat finish
Choosing a shock for your use
Shock absorbers control how quickly the spring compresses and rebounds, which affects comfort, tire contact and control. A shock suited to mostly paved roads with occasional trail use usually strikes a different balance than one built for heavy towing. Valving sets how firm the damping feels, so match it to how the truck is used day to day.
Extended length matters as much as damping on a truck with a lifted suspension. Measure the installed length of the shock you are replacing and compare it with the new one’s range, so the piston does not bottom out or run out of travel. Worn bump stops and springs can change that picture, so inspect them at the same time.
- Measure the installed length before ordering
- Consider bump stops if the ride feels harsh
- Check the spring height after any suspension change
- Replace shocks in pairs on the same axle
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | EXP921500B |
| Shock series | PRO-X |
| Shock type | Twin tube, gas charged, nitrogen stabilized |
| Position | Universal |
| Extended length | 21.6 inches (21.63 inches in the detailed specifications) |
| Collapsed length | 13.2 inches (13.35 inches in the detailed specifications) |
| Travel length | 7.60 inches |
| Body diameter | 2.0 inches |
| Upper mount | Loop (eyelet in the detailed specifications) |
| Lower mount | Loop (eyelet in the detailed specifications) |
| Piston | 1-3/8 inch nylon-banded |
| Piston rod | 5/8 inch chrome hardened |
| Valving | 10-stage velocity sensitive |
| Rebound stop | Teflon |
| Finish | Black powder coat |
| Quantity per package | 1 |
Vehicle fitment
The shock covers Chevrolet and GMC full-size trucks and Suburbans from 1977 to 1991 in C, K, R and V series, Chevrolet Blazers from 1977 to 1991, and GMC Jimmys from 1978 to 1991.
The list does not include Chevrolet or GMC trucks from 1992 and later, and it names no Ford or Ram vehicles.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The shock is listed with loop mounts in one set of specifications and eyelet mounts in another, so confirm the mount type against your truck’s existing hardware before ordering.
Measure the installed length of the shock you are replacing and compare it with the 21.6 inch extended and 13.2 inch collapsed lengths before installing.
What’s included
One PRO-X twin tube shock absorber, part EXP921500B.
Not included: the optional shock boot, which is a separate part.









