Overview
The Pro Comp PRO-X 926543B twin tube shock, part number EXP926543B, is a rear shock with a 26.7-inch extended length for lifted trucks. It fits the 2011–2026 Ram 1500 and the 2014–2021 Ram 2500.
The PRO-X is built for vehicles that see mostly paved roads with occasional off-road use. It has a general-purpose twin tube design, 10-stage velocity sensitive valving, a 2.0-inch body and a 1-3/8-inch nylon banded piston on a 5/8-inch chrome hardened shaft. The valving handles varied road conditions while improving handling. The Teflon rebound stop contributes to a comfortable highway ride, and the shock comes in extended lengths for lifted trucks. Shock boots are sold separately, so decide whether you want one before ordering. The shock is nitrogen stabilized, finished in black powder coat and sold individually.
Key features
- Twin tube design with 10-stage velocity sensitive valving
- Nitrogen stabilized
- 1-3/8-inch nylon banded piston
- 5/8-inch chrome hardened shaft
- Black powder coat finish
- Optional boot, sold separately
Boots and dust protection
Dust and road salt are the usual enemies of a shock rod. Grit that sticks to a chrome rod gets pulled into the seal on every compression stroke, and over time that wears the seal and can leave oil on the body. A boot or dust sleeve blocks much of that debris, and it is most useful on trucks that drive gravel roads, plow snow or run through mud.
Choosing a boot means checking how it fits the rod and the body, so measure the collapsed and extended lengths and make sure the boot will not bind at either end. Keep the rod clean and inspect the boot each time the wheels are off. A torn boot should be replaced, since a damaged boot loses its ability to keep out grit.
- Wipe the rod after muddy drives
- Inspect the boot for tears at each tire rotation
- Check the seal for oil weeping
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | EXP926543B |
| Shock series | PRO-X |
| Position | Rear |
| Shock type | Twin tube |
| Extended length | 26.7 in |
| Collapsed length | 15.9 in |
| Travel length | 10.82 in |
| Body diameter | 2.0 in |
| Gas | Nitrogen stabilized |
| Piston | 1-3/8 in nylon banded |
| Shaft | 5/8 in chrome hardened |
| Finish | Black powder coat |
| Boot | Optional, sold separately |
Vehicle fitment
It fits the 2011–2026 Ram 1500 (Big Horn, Express, Laramie, Limited, Rebel, SLT, TRX and Tradesman trims, among others) and the 2014–2021 Ram 2500.
The Ram 2500 is listed only for 2014–2021, and the Ram 1500 Classic and Ram 3500 are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure the installed length of your current shock before ordering. The 26.7-inch extended and 15.9-inch collapsed lengths are the figures to match.
What’s included
One shock absorber, sold individually.
Not included: The shock boot, which is optional and sold separately.









