Overview
The Pro Comp PRO-M Monotube Rear Shock, part number PR2083, is a silver nitrogen gas charged monotube shock for the 2003–2024 Toyota 4Runner and the 2007–2014 Toyota FJ Cruiser. It is intended for vehicles with a 0 to 2 inch lift.
An internal floating piston keeps the oil apart from the nitrogen charge, which helps prevent the cavitation that robs performance. The multi-stage valving is set for each application. The 2.0-inch shock body holds more oil to help it shed heat during off-road use. The extended length is 23.4 inches and the collapsed length is 15 inches.
Key features
- Monotube design with an internal floating piston
- Nitrogen gas charge
- Multi-stage disc pack valving
- Vehicle specific valving
- 2.0-inch shock body with added oil capacity
- Wiper seal design intended to prevent leaks
- 14mm chrome hardened shaft
- Silver powder coat finish
- Polyurethane shock boot included
- Sold individually
Choosing a rear shock setup
A rear shock controls how the axle and body settle after a bump, and it works hardest on trucks carrying gear or running larger tires. Choosing a unit starts with lift height, since a shock that is too short or too long can limit travel or bind at full extension. Compare the mounting style and the length at both compressed and extended positions before buying. Heat build-up on long descents is another reason to match the shock to how the truck is driven.
Rear shocks are often replaced in pairs so both sides damp the same way. Bump stops, springs and control arm bushings also influence how a new shock feels, so inspect them at the same time. A quick check of the boot and the shaft for dirt or scoring helps the new unit last. Keep the area around the shaft clean after trail runs.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | PR2083 |
| Series | PRO-M |
| Position | Rear |
| Shock type | Monotube |
| Extended length | 23.4 inches |
| Collapsed length | 15 inches |
| Body diameter | 2.0 inches |
| Upper mount | Eyelet |
| Lower mount | Eyelet |
| Shaft | 14mm chrome hardened |
| Finish | Silver powder coat |
| Gas charge | Nitrogen |
| Valving | Vehicle specific |
| Boot | Polyurethane, included |
Vehicle fitment
It fits the 2003–2024 Toyota 4Runner across its trims and the 2007–2014 Toyota FJ Cruiser. Other Toyota models, such as the Tacoma, are not covered. Confirm fit for your vehicle’s year, model and trim before ordering.
The fitment data does not include other Toyota models, such as the Tacoma. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This shock is made for vehicles with a 0 to 2 inch lift, so check your lift height before choosing it. Measure the current rear shock’s extended and collapsed lengths and compare them with the 23.4-inch and 15-inch figures before installing.
Because the valving is vehicle specific, the PRO-M is meant for the vehicles named in the fitment data, and a shock for a different application may not damp the same way. The shock arrives with its polyurethane boot already included, so no separate boot is needed.
What’s included
One rear shock with a polyurethane shock boot. The shock is sold individually.









