Overview
The Pro Comp PRO-X twin tube shock absorber, part number 925518B, is a rear shock designed for 2005–2015 Toyota Tacoma trucks. It is sold individually, with a 22.8 inch extended length and a 13.5 inch collapsed length.
Pro Comp designed the PRO-X for vehicles that see mostly paved roads with occasional off-road use. The twin tube design is general purpose, and the shock is offered in extended lengths for lifted trucks.
The shock has 10-stage velocity sensitive valving, which the brand says adjusts to road conditions and improves handling. A 5/8 inch chrome hardened piston rod and a Teflon rebound stop are meant for a comfortable highway ride and for harder driving.
Velocity sensitive valving changes how much the shock resists based on how fast the shaft moves, so small bumps are absorbed softly while faster impacts are damped more firmly.
Key features
- Twin tube design
- 10-stage velocity sensitive valving
- 5/8 inch chrome hardened shaft
- Teflon rebound stop
- Nitrogen stabilized
- Extended length for lifted trucks
Tacoma suspension and ride height
The Tacoma rear end carries a lot of load in the bed and changes a good deal with lift kits and larger tires. A shock with an extended length suited to a lifted truck keeps the suspension working through its range, but the rear springs, bump stops and shackles also determine how the truck sits. Tire diameter changes can also shift how much travel the shock needs, so plan on checking the whole rear end at the same time.
Tacoma owners who drive on pavement most days often choose a valving setup that feels controlled and steady. Off-road use adds stress to the mounts, so inspect the upper stem and the lower loop after trail trips for cracked rubber or loose bolts. Shocks are usually replaced in pairs on an axle to keep the rear end balanced.
- Check rear springs and bump stops for wear
- Inspect shock mounts after trail trips
- Measure ride height before choosing a length
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 925518B |
| Series | PRO-X |
| Location | Rear |
| Type | Twin tube, gas charged |
| Extended length | 22.8 inches |
| Collapsed length | 13.5 inches |
| Travel | 9.25 inches |
| Body diameter | 2.0 inches |
| Piston | 1-3/8 inch nylon banded |
| Shaft | 5/8 inch chrome hardened |
| Upper mount | Stem |
| Lower mount | Loop |
| Finish | Black powder coat |
| Fitment | Direct fit for 2005-2015 Toyota Tacoma |
| Boot | Optional, sold separately |
Vehicle fitment
It fits 2005–2015 Toyota Tacoma models across several trims, including the Base, Pre Runner, TRD Pro and X-Runner trims.
The list does not include the Toyota Tundra or 4Runner, or Tacoma models from 2016 onward. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Compare the 22.8 inch extended and 13.5 inch collapsed lengths with the mounting points on your vehicle before ordering.
What’s included
One shock absorber, sold individually. The optional shock boot is sold separately.









