Overview
The Pro Comp PRO-X 924543B is a rear twin tube shock absorber for lifted trucks, with an extended length of 24.8 inches. Pro Comp designed the PRO-X for vehicles that mostly see paved roads with occasional off-road use.
The shock uses 10-stage velocity sensitive valving that adjusts to different road conditions, along with a 5/8 inch chrome hardened shaft and a Teflon rebound stop. It fits 2014–2021 Ram 2500 models.
Two terms on the spec sheet are worth knowing. A twin tube shock has a pressure tube inside a reserve tube, which is the standard layout for a general-purpose street and trail shock. Velocity sensitive valving means the damping force rises with how fast the shock moves, so the shock responds differently to small bumps and hard hits.
Key features
- Gas charged, nitrogen stabilized body
- 10-stage velocity sensitive valving
- 1-3/8 inch nylon banded piston
- 5/8 inch chrome hardened shaft
- Black powder coat finish
Rear shock basics
On a heavy-duty pickup, the rear shocks control the load-carrying axle as it moves over bumps and under braking. A shock matched to the truck’s suspension keeps the tires in contact with the road and limits body roll when the bed is loaded. Heavier payloads and towing put more load on each shock, so the damping can feel different than it did when the truck was unloaded.
When choosing a replacement, consider how the truck is used. A truck that tows often may benefit from a shock with strong damping, while a daily driver may prefer a softer ride. Replacing the rear shocks alongside the front ones keeps handling balanced, and worn leaf spring bushings or shackles should be checked at the same time.
- Look for oil residue on the shock body
- Check the mounts for cracked rubber
- Recheck the torque on mount bolts after the first few trips
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 924543B |
| Shock series | PRO-X |
| Location | Rear |
| Shock type | Twin tube, gas charged, nitrogen stabilized |
| Extended length | 24.8 inches |
| Collapsed length | 14.9 inches |
| Travel length | 9.86 inches |
| Body diameter | 2.0 inches |
| Piston | 1-3/8 inch nylon banded |
| Shaft | 5/8 inch chrome hardened |
| Damping | 10-stage velocity sensitive valving |
| Upper and lower mounts | Eyelet or loop, depending on the mount style your truck uses. |
| Finish | Black powder coat |
| Quantity | Sold individually |
Vehicle fitment
It fits 2014–2021 Ram 2500 models.
Ram 1500 models, and Ram 2500 years before 2014 or after 2021, are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure the extended and collapsed lengths of your current shock eye to eye, since travel is the difference between those two figures. A shock that is too short for the lift can limit droop and load the mounts.
What’s included
One PRO-X shock absorber, sold individually. The shock boot is optional and sold separately, so it is not included.









