Overview
The Pro Comp 927510B is a PRO-X twin tube shock absorber for the 1997–2003 Ford F-150 and the 1999–2003 F-150 Lightning, along with the F-250 and F-250 Super Duty models and the 1997 F-350 listed by Pro Comp. It has a 27.8-inch extended length and a 16.3-inch collapsed length, with 11.45 inches of travel.
The PRO-X is a general-purpose twin tube shock built for trucks that see mostly paved roads with occasional off-road use. Its 10-stage velocity sensitive valving is meant to adjust across varied road surfaces, and the 1-3/8-inch nylon banded piston and 5/8-inch chrome hardened shaft are the same core parts used in the rest of the line.
The shock has a stem upper mount and a loop lower mount, a 2.0-inch body and a black powder-coated finish. It is nitrogen stabilized, and the optional shock boot is sold separately from the shock.
Key features
- Twin tube design for general-purpose use
- 10-stage velocity sensitive valving
- 1-3/8-inch nylon banded piston
- 5/8-inch chrome hardened shaft
- Stem upper mount
- Black powder-coated finish
Before you buy
Twin tube shocks control body motion by forcing hydraulic fluid through internal valving, so the damping you feel comes from how that valve stack responds to shaft speed. A general-purpose valve setup usually gives a firmer feel on rough trail sections and a steadier ride on the highway. Decide which of those matters more for your truck before you choose a valve tune.
Gas-charged shocks use nitrogen pressure to resist fluid foaming when the shock heats up, which helps consistency on long grades and repeated bumps. Signs that an old shock needs replacing include fluid seeping down the body, a bouncy ride after dips, cupped tire wear and noise over small bumps. Inspect the mounting bushings as well, since worn rubber can feel like a failing shock.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 927510B |
| Shock series | PRO-X |
| Shock type | Twin tube, gas charged (nitrogen stabilized) |
| Location | Universal |
| Extended length | 27.8 in |
| Collapsed length | 16.3 in |
| Travel length | 11.45 in |
| Body diameter | 2.0 in |
| Piston | 1-3/8 in nylon banded |
| Shaft | 5/8 in chrome hardened |
| Upper mount | Stem |
| Lower mount | Loop |
| Finish | Black powder coat |
| Boot | Optional, not included |
Vehicle fitment
It fits the 1997–2003 Ford F-150 in several trims including the King Ranch and Lariat, the 1999–2003 F-150 Lightning, the 1995–1999 F-250 in several trims, the 1997 F-250 HD in the XL and XLT trims, the 1999–2003 F-250 Super Duty in the Lariat, XL and XLT trims, and the 1997 F-350 in the Base, XL and XLT trims.
Ford models from 2004 onward are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The stem upper mount and loop lower mount should be checked against the existing bracket before installation. Because the list covers a wide range of trucks, compare the 27.8-inch extended and 16.3-inch collapsed lengths with the installed suspension.
What’s included
One twin tube shock with a stem upper mount and loop lower mount. The boot is not included.
Not included: the optional boot.









