Overview
The Pro Comp 926560B is a PRO-X twin tube shock absorber for the 1993 Land Rover Range Rover in the County and County LWB trims, and for the 1993 Range Rover Sport. It has a 27.1-inch extended length, a 16-inch collapsed length and an 11.190-inch travel length.
The PRO-X is a general-purpose twin tube design for vehicles that see mostly paved roads with occasional off-road use. The 10-stage velocity sensitive valving handles a range of road conditions, and the 5/8-inch chrome hardened piston rod works with a 1-3/8-inch nylon banded piston and a Teflon rebound stop.
This shock is unusual in the line because both ends use stem mounts, rather than the loop or clevis ends on most of the other PRO-X shocks. The body is 2.0 inches in diameter and black powder coated, and the gas charge is nitrogen stabilized.
Key features
- Twin tube design for general-purpose use
- 10-stage velocity sensitive valving
- 1-3/8-inch nylon banded piston
- 5/8-inch chrome hardened shaft
- Stem mounts at both ends
- Black powder-coated finish
Stem mounts and bracket changes
Stem mounts thread or pin into a matching bracket, so the fit depends on the stem size and thread as well as the shock length. A change from loop-style brackets usually needs new hardware, so do not force a fit. On an older Range Rover, check the brackets for cracks and corrosion before installing any shock.
Stem designs keep the shock in line with the upper and lower brackets, which helps the shaft run straight. Look for worn bushings, bent brackets, or fasteners that have stretched. After installation, make sure the shock moves freely through its stroke without binding at the stem, and recheck the stem fasteners after the first few drives.
- Check both stem fittings for thread damage
- Inspect bracket mounting points for cracks
- Confirm the stem seats fully before tightening
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 926560B |
| Shock series | PRO-X |
| Shock type | Twin tube, gas charged (nitrogen stabilized) |
| Location | Universal |
| Extended length | 27.1 in |
| Collapsed length | 16 in |
| Travel length | 11.190 in |
| Body diameter | 2.0 in |
| Piston | 1-3/8 in nylon banded |
| Shaft | 5/8 in chrome hardened |
| Upper mount | Stem |
| Lower mount | Stem |
| Finish | Black powder coat |
| Boot | Optional, not included |
Vehicle fitment
It fits the 1993 Land Rover Range Rover in the County and County LWB trims, and the 1993 Range Rover Sport. Coverage is limited to these trims and this model year.
Range Rover models from 1994 onward and the Defender are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because both mounts are stems, the shock will not bolt to loop-style brackets without a change. Check the stem fittings on your vehicle and the 27.1-inch extended length against the installed suspension before driving.
What’s included
One twin tube shock with a stem at each end. The optional boot is sold separately.
Not included: the optional boot.









