Overview
The Pro Comp 915509B is a PRO-X twin tube shock absorber for 1975–1986 Chevrolet and GMC C and K series pickups and Suburbans, including the C10, C20, C30, K10, K20 and K30 models. It also fits the 1975–1986 Chevrolet K5 Blazer. It has a 15.5-inch extended length and a 10.2-inch collapsed length.
This PRO-X is a general-purpose twin tube design for trucks that are mostly driven on pavement with occasional off-road use. The 10-stage velocity sensitive valving is meant to handle a range of road conditions, and the 5/8-inch chrome hardened shaft and Teflon rebound stop help keep the ride steady on the highway.
Both mounts are loop eyes, which suits the older-style brackets used on these trucks. The shock is nitrogen stabilized with a 1-3/8-inch nylon banded piston and a black powder-coated body, and the shock boot is an optional extra that is not included.
Key features
- Twin tube design for general-purpose use
- 10-stage velocity sensitive valving
- 1-3/8-inch nylon banded piston
- 5/8-inch chrome hardened shaft
- Nitrogen stabilized
- Black powder-coated finish
Older truck shock considerations
Shocks on these older trucks work hard because the bodies, springs and bushings have aged. A gas charged twin tube design helps keep damping steady when the oil heats up on long highway runs. Before fitting, check whether the suspension has been lifted or leveled, since the usable travel depends on the current ride height.
Loop eyes are common on these trucks, but the eye diameter and bushing size can vary between model years and axles. Inspect the eye bushings, the frame brackets and any rust around the mounts. Replacing both shocks on the same axle keeps the ride balanced and reduces uneven tire wear.
- Measure eye diameter and bolt size
- Check frame brackets for rust
- Replace shocks in pairs
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 915509B |
| Shock series | PRO-X |
| Shock type | Twin tube, gas charged (nitrogen stabilized) |
| Location | Universal |
| Extended length | 15.5 in |
| Collapsed length | 10.2 in |
| Piston | 1-3/8 in nylon banded |
| Shaft | 5/8 in chrome hardened |
| Upper mount | Loop |
| Lower mount | Loop |
| Finish | Black powder coat |
| Boot | Optional, not included |
Vehicle fitment
It fits 1975–1986 Chevrolet C10, C20, C30, K10, K20 and K30 pickups and their Suburban versions, plus the 1975–1986 Chevrolet K5 Blazer. For GMC it fits the C15, C25, K15 and K25 trucks and the C1500, C2500, K1500 and K2500 models from 1975 to 1986, including Suburbans, plus a 1980 GMC 1500 in the Base trim.
Trucks from 1987 and later are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Both ends use loop eyes, so check the eye diameter against your existing shock before ordering. Compare the 15.5-inch extended length with your installed ride height, since older C and K trucks vary in suspension height.
What’s included
Loop eyes sit at both ends of this twin tube shock. The optional boot is not included.
Not included: the optional boot, plus any hardware needed for the mounts.









