Select your vehicle
-13%

Pro Comp PRO-M Monotube Rear Shock Absorber – PR2115

Pro Comp Suspension

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Fits 2014–2021 Ram 2500 and 2014 Ram 3500
  • Designed for trucks with a 4-inch lift
  • 25.4-inch extended length, 16.7-inch collapsed length
  • Stem upper mount, loop lower mount
  • PRO-M monotube rear shock with polyurethane boot

Description

Overview

The Pro Comp PR2115 is a PRO-M monotube rear shock absorber for the 2014–2021 Ram 2500 and the 2014 Ram 3500. It is built for trucks with a 4-inch lift and measures 25.4 inches extended and 16.7 inches collapsed.

The monotube body keeps the oil and nitrogen gas charge apart with an internal floating piston, which helps prevent cavitation from reducing damping. The multi-stage valving is tuned to the application, and the 2.0-inch shock body holds more oil to manage heat under heavy use. This version is designed for a 4-inch lift, so a truck with a different lift height needs the matching part from the same series.

It has a stem upper mount and a loop lower mount, a 14mm chrome hardened shaft and a silver powder-coated finish, and it includes a polyurethane shock boot.

Key features

  • Monotube body with an internal floating piston
  • Multi-stage disc pack valving
  • 2.0-inch shock body with increased oil capacity
  • Redesigned wiper seal
  • 14mm chrome hardened shaft
  • Silver powder-coated finish

Matching the shock to your lift

A shock has to match the height of the suspension it sits in. When a truck is lifted, the distance between the mounts grows, and a shock with the wrong extended or collapsed length can bottom out, run out of travel, or pull on its mounts. Measure the installed height and compare it with the shock’s lengths before buying, and remember that a different lift size usually means a different shock in the same series.

Stem upper mounts need careful alignment because the stem must seat fully in its bracket without forcing. Check that the stem sits square and that the nut is torqued before the truck is driven. The polyurethane boot protects the shaft from grit, so inspect it after rough trail use and replace it if it is cracked.

  • Measure ride height before choosing a length
  • Seat the stem mount squarely in its bracket
  • Check the boot for cracks after rough use
  • Replace shocks in pairs to keep damping even

Specifications

Brand Pro Comp Suspension
Part number PR2115
Shock series PRO-M
Shock type Monotube, nitrogen gas charged
Position Rear
Extended length 25.4 in
Collapsed length 16.7 in
Shock body diameter 2.0 in
Shaft 14mm chrome hardened
Upper mount Stem
Lower mount Loop
Finish Silver powder coat
Lift height With a 4-inch lift
Boot Polyurethane, included

Vehicle fitment

It fits the 2014–2021 Ram 2500 in the Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Power Wagon, SLT, Tradesman and other trims, and the 2014 Ram 3500 in the Big Horn, Laramie, Lone Star, SLT and Tradesman trims.

The Ram 1500 and Ram 3500 models from 2015 onward are not on this list. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

The shock is rated for a 4-inch lift. Compare the 25.4-inch extended and 16.7-inch collapsed lengths with your installed suspension, and check that the stem upper mount lines up with its bracket before final tightening.

What’s included

One rear shock, with the upper stem mount and polyurethane boot in place.

Fitment

VehicleYearsTrims
Ram 25002014–2021Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Limited, Limited Longhorn, Lone Star, Outdoorsman, Power Wagon, SLT, Tradesman
Ram 35002014Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Lone Star, SLT, Tradesman

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the PR2115 fit a 2014 Ram 3500?

Yes. It fits the 2014 Ram 3500 in several trims, along with the 2014–2021 Ram 2500 models, so a 2014 Ram 3500 with a 4-inch lift is covered.

Does the PR2115 fit a Ram 1500?

No. The Ram 1500 is not among the models it fits, which are the 2014–2021 Ram 2500 and the 2014 Ram 3500. Confirm your model before ordering a replacement shock.

What lift height is the PR2115 designed for?

It is designed for a 4-inch lift. The extended length is 25.4 inches and the collapsed length is 16.7 inches, so compare both figures with the installed suspension before ordering a replacement.

How do I know if the rear shocks are worn?

Look for oil on the shaft, a damaged boot, or a rear end that keeps bouncing after bumps or braking. Worn stem mounts or cracked bushings can also make the shock feel loose. Replace shocks in pairs so both sides damp the same way.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon